Technical Discussion
  >> Technical Issues


Register (or login) on our website and you will not see this ad.


These posts have been archived and can no longer be replied to or modified.
  Print Thread
Standard User jthack
(newbie) Fri 24-Apr-09 10:37:05
Print Post

Missing tones NOT associated with local AM Radio


[link to this post]
 
Using the excellent DMT Tool against my Netgear DG834GT router with the DGTeam firmware, I note the following large gaps in my tones

Gap3 862kHz-940kHz (Tone200-Tone217)
Gap4 970kHz-1018kHz (Tone225-Tone235)

Using a combination of my car radio and http://www.mediumwaveradio.com/uk.php - I find Radio Wales on 882kHz, 100kW at Washford, at a range of 15 miles, and Radio 5 on 909kHz, 50kW at Clevedon, at a range of 33 miles, so that explains Gap 3 (although why BT allow a +/- 20-30kHz guard band for sidebands of less than 15kHz is anyone's guess)

So what's Gap 4 all about? Nearest AM trnsmitter is Radio Devon on 990kHz, 1kW in Exeter at a range of 25 miles, which is not even receiveable on my car radio.

Any ideas why Gap 4 is there please?
Standard User kwikbreaks
(eat-sleep-adslguide) Fri 24-Apr-09 11:23:53
Print Post

Re: Missing tones NOT associated with local AM Radio


[re: jthack] [link to this post]
 
Listen on your radio again after dark.



If you can't fix it with a hammer you've got an electrical problem.
Standard User deleted
(deleted) Sun 26-Apr-09 16:38:17
Print Post

Re: Missing tones NOT associated with local AM Radio


[re: kwikbreaks] [link to this post]
 
Hi

Tones can disappear some time after a sync due to bitswapping and may not be due to "continuous" noise or transmission at that frequency. It could be some electronic equipment in your house or near you that causes some interference at those frequencies when it in use rather than an AM station.

I constantly had a big hole in some higher tones on ADSL2+ which over the course of a few days eroded the SNR margin and it would cause a resync. This stopped completely a couple of months ago and coincided with a change in neighbours. I can only assume the previous neighbours had something leaking RFI.

Regards

Phil


Register (or login) on our website and you will not see this ad.

  Print Thread

Jump to