Well BT eventually came round and the router the engineer used failed to connect anywhere in the house. He fitted a Master Socket and got a download speed of around 1500 kbps or so with all the wiring in the house disconnected.
Adding in the downstairs extension dropped the speed to 1408 kbps and adding in the upstairs extension instantly dropped the connection totally. The engineer gave me the choice of no broadband at all or no upstairs phones. Great service, comes in and leaves the situation worse than when he arrived (he even butchered the connectors on the inside of the Master Socket).
Have since run a new cable up the stairs for testing purposes and got the phones back and 1408 kbps. Woo! Until I plugged in a short extension to the next room where the router normally lives. Instantly back to having no internet.
Replacing this extension with new cable got the internet running again but at 1280 kbps. No idea what was wrong with the wiring (both to get upstairs and also this extension) but the extension does run right past all the wiring for the house alarm and the main control box (with PSU I assume).
So much for the BT line checker we couldn't even get broadband where we live! We still have a forty year old piece of cable connecting us from the Master Socket to the BT line that comes to the house but as it runs down the outside wall and to the Master Socket I am guessing it belongs to BT and I should leave well enough alone.
Any idea how to shield the cable that runs past the alarm box and through all the incoming alarm wiring?
Thanks.



Pages in this thread:
Print Thread
deleted