Setting up BE unlimited with a Draytek Vigor 2820n ??

Trying to set up mu friends Be Unlimited with a Vigor 2820n and having problems finding out exactly what settings to use.

They have the UNlimited package so no static IP but there's so many options in the Vigor setup I'm having problems. I found the following settings below:

Type / Protocol: ETHoA (Ethernet over ATM, also known as MPoA, IPoATM,
or RFC 1483) (May be called RFC 2684 on newer routers)
VPI = 0
VCI = 101
Encapsulation: LLC-based (If presented with a choice, Bridged IP
rather than Routed IP)
Modulation: G.992.5 Annex A (or for Upload+, G.992.5 Annex M)
Primary DNS server: 87.194.255.154 (or OpenDNS: 208.67.222.222, or
GoogleDNS: 8.8.8.8)
Secondary DNS server: 87.194.255.155 (or OpenDNS: 208.67.220.220, or
GoogleDNS: 8.8.4.4


Be broadband uses:
VPI: 0
VCI: 101
Encapsulation: 1483 Bridged IP LLC
Subnet mask: 255.255.240.0
Gataway: 78.105.0.1
DNS1: 87.194.0.51
DNS2: 87.194.0.66


I found these settings online.

Was unsure about the gateway IP address above - surely that would be different for each Be subscriber? If so how do I determine mine? I have the Vigor synching with the ADSL and handshaking/showtime but no internet as such..... anyone have any experience with this sort of set up?

Thanks

have a look at http://www.beusergroup.co.uk/technotes/index.php?tit...

I'd have thought the gateway IP address and subnet mask would be auto-assigned during the "login" process. I certainly don't enter any values into my router.

https://www.bethere.co.uk/web/beportal/techguides_ot...

I've got a 2820 working with BE , and I've answered your post in the BE forum.