Using Cat5e cable for Telephone Line

Hi

I have been fitting my new home out with a cat5e network and I'm about to setup a cupboard in my house as the heart of the network.

I currently use Virgin Media as BB provider and thinking of switching to an ADSL provider as Virgin sucks.

My landline phone connection starts in the porch of my home and I have run at cat5e cable from there to my network cupboard with the plan of using that instead of having cables trapesing along skirting boards and looking a mess.

I have used cat5e before when wiring extension sockets to a BT phone line and it worked fine...

Will it have any issues with transferring ADSL signals and also I'm planning on using it also with new FTTC technolgy when it becomes available in my area!

P.s It is Solid copper core ethernet cable btw.

Should be perfectly fine just stick to using pairs correctly

Ok, That was my opinion on it anyway!

No problems in doing that but if you are taking the ADSL signal all the way to the switch there is the potential for additional noise which would worsen the SNR. Can you install your modem or hub at the point of entry? That way your data with be Ethernet and less susceptible to noise. You can still take the voice side of the phone line through on another able.


And Solid core is ideal for infrastructure cables that are terminated in IDCs. Multi-strand tends to be use for patch leads and crimp on connectors.

Edited by MHC (Mon 02-Sep-13 20:08:32)

Yes I thought about that myself, But would mean running electrics too and realistically I'm mainly doing it for the FTTC.

Also my ether length from the incoming BT line will only be around 5-7 meters anyway.

P.s I'm not running the cable from where an existing BT Master Socket used to be, I'm running it from a mini exchange in my porch that serves my 4 neighbors homes.

Can you make it point to point and not into a patch panel or switch? Or maybe even run the modem power that from an existing location. I have sorted one out where we extended the power lead to almost 10 meters - with significantly higher gauge cable.

If I wanted to do something like that I would just extend my ring main into the porch and add a 13a socket,

But that isn't something I want to do and I also want to keep all my ,my Modems, Router, Switches and Wifi AP's in the one cupboard.

So I'll carry on doing it how I was and just deal with the slight SNR issues as they come.

Also in past experience I have found that removing 8-12 metres of cable from an ADSL installation made barely any difference in connection or speed.

Also temperatures in the porch at different times of the year may affect the performance of the equipment.

I'm running 5e from my drop wire to master socket (around 30meters of wire) with no problem at all.

In reply to a post by epyon:

I'm running 5e from my drop wire to master socket (around 30meters of wire) with no problem at all.

My Sky LLU 24.5db @17020/1182

Isn't your speed rather low for 24.5dB?

Run the CAT5e from the BT DP (mini exchange) to the where you want the master socket. Get BT to put the master socket on the end.

Done it hundreds of times.

It was it actually 28 dunno how it came out like that lol

While Using Cat5e cable for Telephone Line and transferring signals to to ADSL will surely not an issue but be a matter for noise. It can be reduce by installing modem from the entry level.

While i know this

usually

in the winter my line is slower usually sync 500kbps less at least

in the summer time i remember having nearly 19000 sync at some point