How do my Sky stats look? (SR102 black hub)

Hello all. I was with BT Infininty as per my signature but after getting frustrated have left and moved to Sky. I never got my stats with the BT Modem as didn't really fancy hacking it, but the Sky hub allows you some access.

I never got to the bottom of the seemingly poor upload and download speeds with BT and wondered if the stats below would shed some light on that. Are the noise margins average/typical for example. With that sort of noise what are the maximum speeds I could expect to achieve? I'm a bit green with all this so any assistance is greatly received.

Port Status TxPkts RxPkts Collision Pkts Tx b/s Rx b/s Up Time
WAN MER 3795168 7195949 0 1268 452 210:34:25
LAN Up 1727496 1119140 0 403328 21372 210:35:47
WLAN Up 4514109 2122373 0 414 301 210:35:22
Broadband Link Downstream Upstream
Connection Speed 39998 kbps 9999 kbps
Line Attenuation 19.5 dB 0.0 dB
Noise Margin 9.6 dB 11.11 dB

Regards,

Giggsy

Connection Speed 39998 kbps 9999 kbps

That is the full connection speed for a 40/10 FTTC connection, so speed tests in the 34 to 36 Meg down and 8 to 9 Meg up should be the norm outside of peak times.

Mr Saffron - thanks for the response - much appreciated. How do the line attenuation/noise figures look? I'm not sure of the length of my line but wondered, based on the noise/line attenuation figures (if that's possible) where I could get to if I was to go back to an 80/20 package? Thanks again.

Edited by giggsy1977 (Sun 27-Apr-14 21:07:36)

The connection speeds would be the same as you had with Infinity 2 since the FTTC side of things would be the same.