PO Broadband

Can I use BT Hub5 with PO Broadband as PO router not to good - cheers Dan

Yes, if you unlock it so you can use it with other ISPs.

As far as I am aware, not easily, no.

Yes, certainly not an easy task, I know you can unlock it for Plusnet and some other major ISPs, not sure about PO though...

Is that ADSL or VDSL (FTTC)?

Which PO router do you have?

That was the quickest about face I have seen on these forums William.

The BT Hub 5 doesn't need unlocking to use with Plusnet anyway. It just needs the user to input their Plusnet login details. Plusnet recommend a factory reset beforehand which is simple, but I doubt if it's necessary. Particularly if the user has a complex LAN set up on it. Though even a complex LAN I expect could be recovered by saving the config before resetting then restoring after.

I haven't done exhaustive research, but get the impression it cannot be unlocked or used stand-alone on any other ISP, such as the Post Office. Though I could be wrong. However, if the OP's problem is the WiFi on the PO router, I believe the HH5 can be used as a Wireless Access Point connected to it in the usual way. Example.

So you have an ADSL and PO router model Zyxel-AMG1302-T10A.

I had a PO Zyxel-AMG1302-T10B. The PO broadband was rubish and they let me leave early. The router worked very well with a Plusnet ADSL.

To get the PO BB userid and password, I saved the router's romfile.cfg and then edited it with Notepad++

If you do that, you might then be able to use just the HH5. No harm in trying.

To reply to a post, open it and then look for "reply" on the level with the poster's name and on the right side.

I'm still trying to work out what you mean?

OP:

Can I use BT Hub5 with PO Broadband

You:

Yes, if you unlock it so you can use it with other ISPs.

You again:

Yes, certainly not an easy task, I know you can unlock it for Plusnet and some other major ISPs, not sure about PO though...

Seems pretty simple. You said Yes and then said you didn't know. There is no unlock required for PlusNet as they work straight out of the box.

Edited by ian72 (Tue 06-Feb-18 13:09:11)