Technical Discussion
  >> Technical Issues


Register (or login) on our website and you will not see this ad.


  Print Thread
Standard User mrmarktigger
(member) Sat 01-Feb-20 17:26:00
Print Post

Do all FTTC cabinets have G.INP, or only some?


[link to this post]
 
Do all FTTC cabinets have G.INP, or only some?

Is there a way of finding out if a cabinet has G.INP / ReTx ?

------------------------------------------------------------------------------


ATU-R Information
Type: VDSL2
Hardware: Annex A
Firmware: 07-07-09-05-01-07
Power Mngt Mode: DSL_G997_PMS_L0
Line State: SHOWTIME
Running Mode: 17A
Vendor ID: fe004452 41590000
ATU-C Information
Vendor ID: b5004946 544eb206 [IFTN]
Line Statistics

Downstream Upstream
Actual Rate 70527 Kbps 20000 Kbps
Attainable Rate 68148 Kbps 25485 Kbps
Path Mode Fast Fast
Interleave Depth 1 1
Actual PSD 6. 0 dB 6. 2 dB
Near End Far End
Trellis ON ON
Bitswap ON ON
ReTx 0 0
SNR Margin 5 dB 9 dB
Attenuation 15 dB 14 dB
CRC 14979 317
FECS 314863 s 22888 s
ES 5106 s 309 s
SES 30 s 0 s
LOSS 0 s 244 s
UAS 34 s 789247 s
HEC Errors 0 0
RS Corrections 0 0
LOS Failure 0 0
LOF Failure 0 0
LPR Failure 0 0
NCD Failure 0 0
LCD Failure 0 0
NFEC 255 255
RFEC 16 16
LYSMB 5410 18899

Freeserve 0800 Dial-up with Hayes Accura External 336/56k fax modem via com port 2.
Standard User j0hn83
(fountain of knowledge) Sun 02-Feb-20 15:00:13
Print Post

Re: Do all FTTC cabinets have G.INP, or only some?


[re: mrmarktigger] [link to this post]
 
Your cabinet is IFTN as seen in your post.

This is an ECI cabinet and the ECI cabinets don't have G.INP (apart from a handful of users who still have it from old trials).

All Huawei (BDCM) cabinets have G.INP/Retx.

Edited by j0hn83 (Sun 02-Feb-20 15:00:46)

Standard User mrmarktigger
(member) Mon 03-Feb-20 06:02:57
Print Post

Re: Do all FTTC cabinets have G.INP, or only some?


[re: j0hn83] [link to this post]
 
Many thanks for the info j0hn83.

That explains why it's never shown up as enabled.

Freeserve 0800 Dial-up with Hayes Accura External 336/56k fax modem via com port 2.


Register (or login) on our website and you will not see this ad.

  Print Thread

Jump to