new to 100meg can some one confirm for me

hi just had 100meg fitted and im very happy with it but can some one confirm these stats for me im not sure how to work them out but to me the stats look like 200/20 theres 4x 53 for down stream and up stream looks to be 20 although i could just be reading it wrong because then at the bottom it says Max Traffic Rate as 100/10 dose it just mean that 200/20 is there but the modem is stopping it at 100/10

Startup Procedure
Procedure Status Comment
Acquire Downstream Channel 299000000 Hz Locked
Connectivity State OK Operational
Boot State OK Operational
Configuration File OK
Security Enabled BPI+


--------------------------------------------------------------------------------

Downstream Channels
Lock Status Modulation Channel ID Max Raw Bit Rate Frequency Power SNR Docsis/EuroDocsis locked
Locked QAM256 10 55616000 Kbits/sec 299000000 Hz 7.6 dBmV 41.9 dB Hybrid
Locked QAM256 11 55616000 Kbits/sec 307000000 Hz 7.7 dBmV 41.9 dB Hybrid
Locked QAM256 12 55616000 Kbits/sec 315000000 Hz 8.1 dBmV 42.6 dB Hybrid
Locked QAM256 13 55616000 Kbits/sec 323000000 Hz 7.9 dBmV 43.3 dB Hybrid
Unlocked Unknown 0 0 Ksym/sec 0 Hz 0.0 dBmV 0.0 dB Unknown
Unlocked Unknown 0 0 Ksym/sec 0 Hz 0.0 dBmV 0.0 dB Unknown
Unlocked Unknown 0 0 Ksym/sec 0 Hz 0.0 dBmV 0.0 dB Unknown
Unlocked Unknown 0 0 Ksym/sec 0 Hz 0.0 dBmV 0.0 dB Unknown


--------------------------------------------------------------------------------

Upstream Channels
Lock Status Modulation Channel ID Max Raw Bit Rate Frequency Power
Locked ATDMA 6 20480 Kbits/sec 45800000 Hz 39.0 dBmV
Unlocked Unknown 0 0 Ksym/sec 0 Hz 0.0 dBmV
Unlocked Unknown 0 0 Ksym/sec 0 Hz 0.0 dBmV
Unlocked Unknown 0 0 Ksym/sec 0 Hz 0.0 dBmV



--------------------------------------------------------------------------------

Primary Downstream Service Flow
Downstream(0)
SFID 3775
Max Traffic Rate 102400000 bps
Max Traffic Burst 10000 bytes
Mix Traffic Rate 0 bps


--------------------------------------------------------------------------------

Primary Upstream Service Flow
Upstream(0)
SFID 4076
Max Traffic Rate 10250000 bps
Max Traffic Burst 16320 bytes
Mix Traffic Rate 0 bps
Max Concatenated Burst 16320 bytes
Scheduling Type Best Effort

thanks for any info Ash

> at the bottom it says Max Traffic Rate as 100/10 dose it just mean that 200/20 is there but the modem is stopping it at 100/10

Yes. Your config file determines the maximum speed you will get not the channel capacity. Those channels are shared with others in your local area and are not dedicated to your connection. My channels show the same capacities as yours and I'm on 50Mbps.

thanks i get it now was just a little confused but that makes total sense

Ash