|
|
Hi All,
Had VM 100Mbps service installed for over a week now and setup a TBB monitor on my ip. The latency looks wild on my connection, this defo doesn't look right does it?
https://www.thinkbroadband.com/broadband/monitoring/...
|
|
|
Superhub 3 and the joy of the Intel Puma chipset, i.e. delays and low priority in responding to pings.
|
|
The author of the above post is a thinkbroadband staff member. It may not constitute an official statement on behalf of thinkbroadband.
|
|
|
|
Thanks for the reply Andrew, so is this a normal graph for a superhub 3 VM user then?
|
|
Register (or login) on our website and you will not see this ad.
|
|
|
|
Yup
|
|
|
|
Looks normal to me, welcome to VM and the SH3. Not a lot you can do on this.
|
|
|
|
That's how Hub 3 graphs used to look, but the Intel Puma issue was resolved in a new firmware patch several months ago. The graph should look much better now.
Login to the Hub and select Admin, Info, and check the firmware version. It should be 9.1.116.608.
|
|
|
Very surprised MrSaffron didn't think to mention there's an updated firmware that fixes the issue. It was rolled out to users on the top tier many months ago, not sure if it's been rolled out to all users yet.
https://www.thinkbroadband.com/broadband/monitoring/...
|
|
|
|
Thanks for the responses everyone, just checked the firmware version.
Hub 3.0 device information
The information below shows the current status of this Hub 3.0.
Standard specification compliant : DOCSIS 3.0
Hardware version : 10
Software version : 9.1.116V
|
|
|
Software version : 9.1.116V
Sadly that the bad one.... You could try contacting customer support.
May also be worth doing a hard reset on the modem and see if it gets updated over the coming few days
Also when I got the initial update, it seemed to only update in router mode not modem mode.
You need *608 !
|
|
|
Mine updated fine in modem mode. I was initially on Vivid 200 as 350 was not available at first, when I changed to Vivid 350 it updated immediately.
|
|
|
Very surprised MrSaffron didn't think to mention there's an updated firmware that fixes the issue. It was rolled out to users on the top tier many months ago, not sure if it's been rolled out to all users yet.
https://www.thinkbroadband.com/broadband/monitoring/...
Yip agreed i also found it strange he never mentioned it.
Like you got i the firmware update about 6 mnths ago to fix the issue.i'm on the 350 tier as well and my friend who is on the 200 tier got the firmware update about 3 mnths ago if i remember correctly.
** Edit: Forgot to add BQM Link :
My Broadband Ping
Vivid350/20+Mbps (Standalone BroadBand Connection)
Edited by djfunkdup (Tue 23-Oct-18 18:04:12)
|
|
|
|
Is there a way of forcing a firmware update while the Hub is in Modem mode?
Thanks for any information
|
|
|
|
Sorry no
|
|
|
A reboot should check for FW updates? if not get support via the forum probably best to force it to you!
|
Pages in this thread: 
Print Thread
