BT Talk Working On 3Com Router With Linksys PAP2 !

Finally cracked it guys the homehub can go in the bin now

been trying for weeks to use my 3com Office Connect modem/router and my Linksys PAP2 ATA in place of the hub.

tried all sorts of combonations of different log in details and until tonight was unsuccessful.

have now cracked the details to use a ATA in place of the hub.

visit the w*wbt.com/bbv configure page and when the configure window open right click the config tab and select open in a new window and all the info sent to the hub inc passwords will be displayed in the web address bar (where you normally type in www.) its long so highlight and copy to word doc.

it will look like this:

Password=T.4KB********************
&EncryptionPW=*******
&MGCP=www.bbvservice-5601x.bt.com
&SIPTransportProtocol=UDP&SIPTransportPort=5060
&SIPRegistrarAddress=btsip.bt.com
&SIPRegistrarPort=5060
&SIPOutboundProxyAddress=sip.btsip.bt.net
&SIPOutboundProxyPort=5060
&SIPProxyAddress=btsip.bt.com
&SIPProxyPort=5060
&SIPPhoneNumber1=44560*******
&SIPCallerName1=&SIPUsername1=44560*******@btsip.bt.com
&SIPPassword1=********KB1XQJU
&SIPPhoneNumber2=
&SIPCallerName2=
&SIPUsername2=
&SIPPassword2=
&hash=f5365c06816483c39f640434466b1598
&SIPHashB=2a2b69b074e2adcf1d435524c12a018c
&SIPHashC=923eb9f23e1e324c7d3936589d51a90b&SIPHashD=c8589ba5d5f65f42f8e822e83ad90690
&SIPHash=b765101d4b1622f09084330da523aa7a

these are the settings for the ATA

Line 1 tab:

NAT Settings:

NAT Mapping Enable: Yes

SIP Settings:

SIP Port: 5060
EXT SIP Port: 5060

Proxy and Registration:

Proxy: btsip.bt.com
Use Outbound Proxy: Yes
Outbound Proxy: sip.btsip.bt.net

Subscriber Information:

User ID: 445601xxxxxx (this is your talk tel no)
Password: Here your put your "sip password 1" from the info above

tested and working perfect only thing thats not the same is when i dial out on the broadband line i dont hear the higher pitched dial tone like the hub but i've yet found where to adjust the pitch !

so maybe your thinking its only using the normal tel line ? i did so rang my mobile and hey up came the broadband tel number as a missed call

i hate being beat but this one nearly did

now fire up your ata's and bt talk ! nearly forgot the call quality is better than when the bt freestyle was connected to the hub.

N.B where i have put ***** above its my log in details your settings page will have all your details for use

nearly forgot when you log in to your ata you'll need yo go to advanced settings as basic you cant see all the config options.

The UK settings for the PAP2 are the same as all sipura/linksys units... these can be found here:

http://66.249.93.104/search?q=cache:IybqnMkKgAEJ:www.provu.co.uk/pdf/sipura/sipura_uk_regional_settings.pdf+sipura+spa+regional+settings+uk&hl=en&ct=clnk&cd=1&client=firefox-a

if that top link doesnt work try:

http://www.provu.co.uk/pdf/sipura/sipura_uk_regional_settings.pdf

popping all those bits in to your PAP2 will give it the same sounds and tones as a normal uk phone, e.g. normal dial tone etc.

hope this helps.

B.

P.S: Congrats on getting it working!

Edited by Bleem (Wed 13-Sep-06 12:19:03)

Nice one hyp. Been trying to get this to work on my SPA-1001 but not very successfully even with yarwell's help.

I'm gonna try it when I get in tonight and see what happens.

if when you have config all the above and find you dont have a ring tone when someone calls your Broadband tel no:

log into your pap2

go to
admin login => regional (must be in advanced view) => (see left pane title letter and roll down to) ring call and call waiting tone spec => ( see right pane) ring waveform => ( click pull down menu) select trapezoid. now save settings and ring your broadband number.

the hub did all this for you and the pap just needed telling what to do.

only thing your missing is when before when someone called you your hub rang both normal and B.Band phones (if you had it set this way) the ata pap2 only works on your broadband line obviously, so if you want calls on te b.band phone tell all your friends the number.

regards

ps i hope this is useful as i wanted to dump the hub but until i had the talk working i was trapped and stuck with it.

I'm having a go with a Cisco ATA186. So far I can get dial tone but not ring out, however I can ring in OK. Log of outgoing call failure below :-

060914|23:51:10 Calling 1471
060914|23:51:10 SCC Cmd[0:0]CLIP
060914|23:51:10 SCC Cmd[0:0]CALL
060914|23:51:10 [0:0]Start RTP Rx
060914|23:51:10 RTP Rx Init: 0, 0
060914|23:51:10 [0]INVITE Retry 0
060914|23:51:10 Response=400; Bad Request
060914|23:51:10 INVITE failed
060914|23:51:10 SCC:ev=7[0:0] 3 0
060914|23:51:10 [0]StartTone 2
060914|23:51:15 [0]StopTone
060914|23:51:15 SCC Cmd[0:0]RELEASE

Take it the home hub isnt much cop then?

CoXen

no mate its a pile of rubbish it has to mant probs and is inside a chepo thompson innerards, some here have had no probs others have which is why i spent so long getting a Lynksys PAP2 ATA working so me and others here could have the option of using their own routers.

bye the way it works like a dream.

if anyone is having probs config bt talk p.m me a tel number i'll talk you through it.

regrads

did you have any other settings already on the ATA (for example STUN server) or was it a new unit with just the handful of settings described above entered ?

Yeh, i'm running pap2, that home hub looked good on the advert , shame it's a loada ****

CoXen

My linksys ata came new with basic settings loaded in relation to ring and lots of other settings, i had to insert the info i posted above only to get it to work on BT Talk.