Anyone willing to help me

I'm struggling with the settings on my linksys voip adapter, is anyone willing to offer help by email to me.

Thanks

Angus

which model, which provider ?

Hi - Thanks

Its a Linksys PAP2 T and I am using both Sipgate and Tesco internet. I have managed to configure Line 1 for sipgate and it works fine. What I want is to set line 2 for Tesco but I cant get that to work.

Can I have just one phone plugged into line 1 and set it to ring on both incoming lines and allow me to select an outgoing provider, perhaps by dialing a number before the call.

I've entered my tesco info and tried it but get nothing, I even tried plugging the phon einto line 2 to see if that worked but no luck.

Any advice gratefully received

the PAP2 has two completely different circuits and accounts to feed two phones, there's no way that I am aware of to combine the lines internally.

You may be able to use a fancy dialplan to use one phone and one circuit to route according to a prefix, but for starters I should concentrate on getting the Tesco service working on the second port by itself.

What does the Tesco line do - does it register, get a dial tone, make outbound calls but not inbound etc etc.

No dial tone, nothing. Not even sure if they allow another adapter to be used but I guess if I have the right info it should work.

Angus

post the settings - also can you check them with a softphone.

We did have a few of these that were faulty and allowed line 1 to work, but not line 2