|
|
|
I've had to resurrect an old XP laptop for my brother to use. When I was using it previously I was able to connect it to my router with an ethernet cable and therefore straight to the internet. However now when I do this although it says the 1394 connection is connected at 400mps(?) I cannot access the internet. The router lights up to indicate that a connection has been made. The "Internet Protocol (TCP/IP) box is checked in the connection properties box, but if a try and repair the connection I get a message saying that windows cannot finish repairing the connection because TCP/IP is not enabled and tells me to contact the network manager(!).
Any suggestions greatfully recieved.
|
|
|
"1394 connection is connected at 400mps"
I thought this was a firewire connection. All very strange. Someone will be able to assist you.
Was Eclipse Home Option 1 & VM 2Mb
Now O2 standard
|
|
|
|
As broadband66 says 1394 is indicating a Firewire 400mbps connection (typically used to transfer data from a digital video camera).
Can't you check in device manager that the Ethernet network device is enabled and operational?
|
|
Register (or login) on our website and you will not see this ad.
|
|
|
1394 sounds like "firewire" connection - is there a modem or similar connected to it.
Ken
Nostalgia is memory with the pain removed
|
|
|
|
I think you are right, it is the firewire connection. So where has my ethernet connetion gone I wonder? That'll teach me to try and use a machine thats been lying dormant in the loft for 3 years.
|
|
|
|
Looked in device manager and apparently the ethernet controller device drivers are not installed. Am I on the right track. (Kicking myself for not remembering that the 1394 device was firewire)
|
|
|
1394 is a different connection standard. Known as Firewire and other names. Cannot connect using Ethernet connections.
Google is your friend....
http://support.microsoft.com/kb/307736
http://en.wikipedia.org/wiki/IEEE_1394_interface
Nick
Plusnet Plusnet Pro 21CN Netgear DGND3300v2 router
Windows XP Pro SP3
|
|
|
|
Sounds right. It's odd that the device drivers aren't present. I'd search for the drivers on the web.
|
|
|
Hi there,
With XP you can TWEAK YOUR SPEEDS - All the info you need is in the tweak links below in my sig.
It works, easy to do, and FREE.
Enjoy!
|
|
|
|
Did a bit of a google on the problem, and the loss of these drivers and the inability to use the ethernet connection can apparently be an issue after a reinstall of XP (which is what I did).
|
|
|
|
Have you sorted it now? One thing to try might be the install new hardware option (the thing which pops up when Windows detects new hardware). I think that will trawl the web to find the drivers if asked.
If you have no joy don't dump the machine, install Linux instead (it should recognise the network card).
|
|
|
How will it trawl the web with no connection?!
Comms is hard 
|
|
|
With no connection? With great difficulty. I thought the problem was finding working XP drivers for the installed network card. Linux installations come with such drivers by default.
edited to add: I misunderstood your post. Duh
Edited by deleted (Fri 09-Jul-10 23:06:10)
|
|
|
How will it trawl the web with no connection?!
Heliograph or smoke signals perhaps ?
|