Windows XP blue screen of death after windows logo

Hi there

my friends xp (media center edition) machine ( fully up-to-date and security installed) has suddenly decided to stop working.

After logon gets blue screen of death and restarts , then wants to do a disk check, this process just continues in a loop

safe mode will not boot, tried last known good configuration, same happenns

then we worked out how to Disable automatic restart on system failure

so here is the info from the blue screen of death

the problem seems to be caused by the following file :LVPrcMon.sys
The driver unloaded without canceling pending operations

If this is the first time you've seen this stop error screen, restart your computer. If this screen appears again, follow theses steps:

Check to make sure any new hardware or software is properly installed. If this is a new installation, ask your hardware or software manufacturer for any windows updates you may need.

If problem continue, disable or remove any newly installed hardware or software. Disable BIOS memory options such as caching or shadowing. If you need to use Safe Mode to remove or disable components, restart your computer, press F8 to select advanced options, and then select Safe Mode.


Technical Information:

*** STOP: 0x000000D4 (0xF679B410, 0x00000002 , 0x00000000 , 0x80537402)

LVPrcMon.sys

Beginning dump of physical memory
Physical memory dump complete.
Contact your system administrator or technical support group for further assistance.

Many thanks for any help

Seems to be a Logictech driver issue - possibly a clash or hardware issue. Suggest unplugging any logictech equipment before powering up see if that cures it

otherwise browse http://forums.logitech.com, e.g.
http://forums.logitech.com/t5/Webcams/LVPrcMon-sys-b...

btw: when searching google got several sites blocked by my anti-virus s/w, so suggest a little care when browsing

In reply to a post by Anonymous:

then wants to do a disk check

Do you let it do so? If all else fails you might as well let it do a disk check with repair. It can cure a lot of problems.

In reply to a post by Kenneth:

Seems to be a Logictech driver issue - possibly a clash or hardware issue. Suggest unplugging any logictech equipment before powering up see if that cures it

otherwise browse http://forums.logitech.com, e.g.
http://forums.logitech.com/t5/Webcams/LVPrcMon-sys-b...

btw: when searching google got several sites blocked by my anti-virus s/w, so suggest a little care when browsing

hi there,

i do not have any logitec peripherals, and i do not think i have any of their software, but i can not get into windows to check , many thanks for your help.

also i let it do the full disk check , the computer wants to do it every time it boots , many thanks

In reply to a post by XRaySpeX:

In reply to a post by Anonymous:

then wants to do a disk check

If all else fails you might as well let it do a disk check with repair. It can cure a lot of problems.

how do i do that , many thanks

Pop in the XP disk and on boot up (remember that the BIOS needs to be set to alternatively boot on CD-Rom, if not already set to).

It should give the option to repair the installation along the way.

STOP 0x000000D4 : SYSTEM_SCAN_AT_RAISED_IRQL_CAUGHT_IMPROPER_DRIVER_UNLOAD


STOP Errors are usually the result of a hardware malfunction or device driver issue. It is also possible to receive a Blue Screen Error due to bad system memory, malfunctioning power supply, components overheating, or hardware overclocked beyond its specification. In older versions of the Windows OS you may also receive Blue Screen Errors due to incompatible DLL files.
Since the only option when receiving a Blue Screen Error is to reboot, any unsaved data is lost. With that in mind, it is very important to eliminate these errors to protect your data.
Basic Troubleshooting
Troubleshooting STOP Errors can be a difficult and time consuming process. Try these basic steps to fix your own Blue Scree Error. We hope it will help you avoid an expensive service call and provide a rewarding experience of solving the problem on your own.

The first and simplest thing to do is recall any changes you may have just made to your computer. Did you just install a new piece of hardware or install a new application? If so, revert these changes and see if your system becomes stable again. If your becomes stable again but you really need those changes to work you could try to clean your system registry and then try to make your required changes. If your recent change was a new piece of hardware be sure it is properly installed and that you are using the correct drivers.
Perform Windows Updates and install all updates and service packs. It is possible that Microsoft has released a patch to fix the STOP Error you are receiving.

Keep your device drivers up to date. The majority of STOP Errors are hardware and driver related. A driver update may repair a corrupt driver or fix a driver conflict between devices.
Some STOP Errors can be caused by viruses. Make sure your virus software is up to date and perform a virus scan.
Make sure that all of your cables and other components inside your computer case are properly attached and seated. If you have hardware not in securely installed you may receive STOP Errors.


Stop 0xD4: SYSTEM_SCAN_AT_RAISED_IRQL_CAUGHT_IMPROPER_DRIVER_UNLOAD
The SYSTEM_SCAN_AT_RAISED_IRQL_CAUGHT_IMPROPER_DRIVER_UNLOAD stop error code has a value of 0x000000D4. This indicates that a driver did not cancel pending operations before unloading.



quoted from

http://www.errordecoder.com/stop-error-codes/STOP-0x...

http://forums.logitech.com/t5/Webcams/LVPrcMon-sys-b...