Connected to an ECI cabinet

Stats recorded 13 Jan 2016 12:05:40

DSLAM/MSAN type: IFTN:0xb204 / v0xb204
Modem/router firmware: AnnexA version - A2pvbH042b.d26b
DSL mode: VDSL2 Profile 17a
Status: Showtime
Uptime:
Resyncs: 0 (since 12 Jan 2016 19:36:09)

Downstream Upstream
Line attenuation (dB): 18.1 0.0
Signal attenuation (dB): Not monitored
Connection speed (kbps): 62691 18756
SNR margin (dB): 6.3 6.1
Power (dBm): 13.8 6.8
Interleave depth: 1227 1
INP: 3.00 0
G.INP: Not enabled

RSCorr/RS (%): 1.0986 0.0086
RSUnCorr/RS (%): 0.0012 0.0000
ES/hour: 0.74 0.84

Edited by deleted (Wed 13-Jan-16 12:06:29)

I don't think your ES error rate is high enough for for DLM intervention. If your connection remains stable you should see a reduction in interleaving, takes a few days though.

In reply to a post by BatBoy:

I don't think your ES error rate is high enough for for DLM intervention. If your connection remains stable you should see a reduction in interleaving, takes a few days though.

I was going to say this, looks like about 30 errored seconds, and FECs are usually ok as those are errors corrected so not really a problem.

That's good to know will leave it and see what happens.