Technical Discussion
  >> Technical Issues


Register (or login) on our website and you will not see this ad.


These posts have been archived and can no longer be replied to or modified.
  Print Thread
Standard User IamQ
(committed) Sun 29-Mar-09 23:10:19
Print Post

Target margin


[link to this post]
 
I've seen it on here somewhere but just can't find it at the moment;

How long will it normally take for the target margin to back off, or reset to the default 6db on a BTWS line now thats its stable again and a previous fault fixed.
Administrator MrSaffron
(staff) Sun 29-Mar-09 23:26:04
Print Post

Re: Target margin


[re: IamQ] [link to this post]
 
14 days of stable sync and low numbers of errors for every 3dB drop in target

Andrew Ferguson, [email protected]
www.thinkbroadband.com - formerly known as ADSLguide.org.uk
The author of the above post is a thinkbroadband staff member. It may not constitute an official statement on behalf of thinkbroadband.
Standard User deleted
(deleted) Sun 29-Mar-09 23:26:22
Print Post

Re: Target margin


[re: IamQ] [link to this post]
 
In my experience, around 14 days for each 3dB drop.


Register (or login) on our website and you will not see this ad.

Standard User IamQ
(committed) Sun 29-Mar-09 23:32:57
Print Post

Re: Target margin


[re: MrSaffron] [link to this post]
 
ta!
Standard User adebov
(eat-sleep-adslguide) Thu 02-Apr-09 17:57:54
Print Post

Re: Target margin


[re: MrSaffron] [link to this post]
 
In reply to a post by MrSaffron:
14 days of stable sync and low numbers of errors for every 3dB drop in target

If you're lucky, and not on an Alcatel DSLAM (which, I still maintain, have a tendency to refuse automatic margin drops).
Take my parent's line, for example, short enough to easily get 10Mbps+ from BE/O2; stuck on a 15dB target for well over a year; virtually no errors; last uptime something like 28 days; will it budge from 15dB?......Will it heck as like!

Ade

ADSL2+ with BE
DL Sync Blimey....4707kbps now!
UL Sync 1088kbps

DG834GT with DGTeam firmware
Standard User iand
(committed) Thu 02-Apr-09 19:55:40
Print Post

Re: Target margin


[re: adebov] [link to this post]
 
what about making the line "worse" so you sync at a lower speed, say 1/2 what you are on now. Keep that for 14-20 days then make it better again. The BT system should see that as a change and start the process...

IanD
Administrator MrSaffron
(staff) Fri 03-Apr-09 09:05:23
Print Post

Re: Target margin


[re: adebov] [link to this post]
 
Have passed on a few lines in my time that are like this...so if you want email me the line details and stats, but I'd suggest wait until Monday

Andrew Ferguson, [email protected]
www.thinkbroadband.com - formerly known as ADSLguide.org.uk
The author of the above post is a thinkbroadband staff member. It may not constitute an official statement on behalf of thinkbroadband.
Standard User adebov
(eat-sleep-adslguide) Sat 04-Apr-09 00:25:42
Print Post

Re: Target margin


[re: iand] [link to this post]
 
In reply to a post by iand:
what about making the line "worse" so you sync at a lower speed, say 1/2 what you are on now. Keep that for 14-20 days then make it better again. The BT system should see that as a change and start the process...

Already tried that - the margin seems stuck at 15dB.
I could always tweak (putting a Speedtouch router in place, with the margin tweaked as low as possible - which will enable a full speed sync), but why should I, to cover for a BT system which doesn't work properly?

Ade

ADSL2+ with BE
DL Sync Blimey....4707kbps now!
UL Sync 1088kbps

DG834GT with DGTeam firmware
  Print Thread

Jump to