My Line Stats and more.

Thought I would post my line stats here and for future so other can give advice and let me know if I am getting what I shoud.

I reconnected my HG610 modem today for the stats. I still disconnected after about one and a half hours again. I called PN for the DNS and had to set up an IP in windows. Think that has sorted it, as cross fingers, it has stayed connected for 7 or so hours.

This modem does not seem to work on acquire ip automatically.

My stats for about an hour ago. From XP

# xdslcmd info --pbParams
xdslcmd: ADSL driver and PHY status
Status: Showtime
Retrain Reason: 0
Max: Upstream rate = 12795 Kbps, Downstream rate = 49568 Kbps
Path: 0, Upstream rate = 12799 Kbps, Downstream rate = 49390 Kbps

Discovery Phase (Initial) Band Plan
US: (0,95) (868,1207) (1972,2783)
DS: (32,859) (1216,1963) (2792,3959)
Medley Phase (Final) Band Plan
US: (0,95) (868,1207) (1972,2783)
DS: (32,859) (1216,1963) (2792,3959)
VDSL Port Details Upstream Downstream
Attainable Net Data Rate: 12795 kbps 49568 kbps
Actual Aggregate Tx Power: 6.9 dBm 12.1 dBm
VDSL Band Status U0 U1 U2 U3 D1 D2 D3
Line Attenuation(dB): 5.6 30.1 45.0 N/A 14.9 37.5 57.7

Signal Attenuation(dB): 5.6 29.5 43.8 N/A 14.9 37.5 57.7

SNR Margin(dB): 6.0 6.1 6.1 N/A 6.1 6.1 5.9

TX Power(dBm): -4.3 -12.1 6.4 N/A 8.8 7.9 3.8

#


xdslcmd info --stats
Welcome Visiting Huawei Home Gateway
Copyright by Huawei Technologies Co., Ltd.
ATP> sh


BusyBox v1.9.1 (2009-11-28 11:57:58 CST) built-in shell (ash)
Enter 'help' for a list of built-in commands.

# xdslcmd info --stats
xdslcmd: ADSL driver and PHY status
Status: Showtime
Retrain Reason: 0
Max: Upstream rate = 12772 Kbps, Downstream rate = 49752 Kbps
Path: 0, Upstream rate = 12799 Kbps, Downstream rate = 49390 Kbps

Link Power State: L0
Mode: VDSL2 Annex B
VDSL2 Profile: Profile 17a
TPS-TC: PTM Mode
Trellis: U:ON /D:ON
Line Status: No Defect
Training Status: Showtime
Down Up
SNR (dB): 6.1 6.1
Attn(dB): 0.0 0.0
Pwr(dBm): 12.1 6.9
VDSL2 framing
Path 0
B: 239 237
M: 1 1
T: 64 52
R: 0 16
S: 0.1546 0.5912
L: 12416 3437
D: 1 1
I: 240 127
N: 240 254
Counters
Path 0
OHF: 10952973 1357412
OHFErr: 250 14
RS: 0 3666863
RSCorr: 0 77
RSUnCorr: 0 0

Path 0
HEC: 726 0
OCD: 0 0
LCD: 0 0
Total Cells: 2578325516 0
Data Cells: 7197692 0
Drop Cells: 0
Bit Errors: 0 0

ES: 174 14
SES: 0 0
UAS: 19 19
AS: 27207

Path 0
INP: 0.00 0.00
PER: 2.47 7.68
delay: 0.00 0.00
OR: 80.83 33.30

Bitswap: 2601 1383

Total time = 7 hours 33 min 47 sec
FEC: 0 0
CRC: 250 0
ES: 174 14
SES: 0 0
UAS: 19 19
LOS: 0 0
LOF: 0 0
Latest 15 minutes time = 3 min 47 sec
FEC: 0 0
CRC: 4 0
ES: 4 0
SES: 0 0
UAS: 0 0
LOS: 0 0
LOF: 0 0
Previous 15 minutes time = 15 min 0 sec
FEC: 0 0
CRC: 11 0
ES: 9 0
SES: 0 0
UAS: 0 0
LOS: 0 0
LOF: 0 0
Latest 1 day time = 7 hours 33 min 47 sec
FEC: 0 0
CRC: 250 0
ES: 174 14
SES: 0 0
UAS: 19 19
LOS: 0 0
LOF: 0 0
Previous 1 day time = 0 sec
FEC: 0 0
CRC: 0 0
ES: 0 0
SES: 0 0
UAS: 0 0
LOS: 0 0
LOF: 0 0
Since Link time = 7 hours 33 min 27 sec
FEC: 0 77
CRC: 250 14
ES: 174 14
SES: 0 0
UAS: 0 0
LOS: 0 0
LOF: 0 0
#

Edited by deleted (Fri 25-Jan-13 01:13:24)

Given your SNR margin is bang on target, I would say you're getting the max sync rate.

Thanks but it's not really matching my speed tests is it?

BTW can this modem drop PPP session? I don't really want to switch it off yet, just to change IP address.

May post my stats again later, if it's still connected.

Edited by deleted (Fri 25-Jan-13 01:57:41)

In reply to a post by superspeed:

Thanks but it's not really matching my speed tests is it?

BTW can this modem drop PPP session? I don't really want to switch it off yet, just to change IP address.

May post my stats again later, if it's still connected.

Are you meaning the HG610 VDSL router? Modems don't handle PPP.

49390 *0.96 to remove overheads is 47414 Mbps

So what speed are you wanting to see?

Particularly given that even I do speed tests on a direct 100 Mbps link I don't actually get the 100 Mbps due to other overheads in the Operating System and hardware.

47414 Kbps = 46.3027344 Mbps

In reply to a post by BatBoy:

47414 Kbps = 46.3027344 Mbps

47414 kbps = 47.414 Mbps actually... The k and M are used in their correct 10^3 and 10^6 meanings for linespeed

In reply to a post by ferretuk:

The k and M are used ...

Did you mean k or K?

In reply to a post by ferretuk:

In reply to a post by BatBoy:

47414 Kbps = 46.3027344 Mbps

47414 kbps = 47.414 Mbps actually... The k and M are used in their correct 10^3 and 10^6 meanings for linespeed

If you say so, I just googled "convert 47414 kbps to mbps".

He was referring to TBB's non-standard use of K = 1024 in comms speeds.