Can anybody with the knowledge advise me on my DSL connection - report below?
BT Homehub - still with the 'R' firmware. Hub is on an extension line not on the 'bell' wire.
Anything in the report below I should watch out for ie. SNR, what about the Errors towards the end of the report?
Can anyone explain what the readings are - I'm sure that this would help loads of other users?
Many thanks in advance!
Uptime: 2 days, 1:33:20
Modulation: G.992.1 Annex A
Bandwidth (Up/Down) [kbps/kbps]: 448 / 3,968
Data Transferred (Sent/Received) [MB/MB]: 53.97 / 490.73
Output Power (Up/Down) [dBm]: 11.5 / 19.5
Line Attenuation (Up/Down) [dB]: 11.0 / 22.0
SN Margin (Up/Down) [dB]: 21.0 / 8.5
Vendor ID (Local/Remote): TMMB / ALCB
Loss of Framing (Local/Remote): 0 / 0
Loss of Signal (Local/Remote): 0 / 0
Loss of Power (Local/Remote): 0 / 0
Loss of Link (Remote): 0
Error Seconds (Local/Remote): 75 / 0
FEC Errors (Up/Down): 0 / 53,858
CRC Errors (Up/Down): 0 / 71
HEC Errors (Up/Down): 0 / 66



Print Thread
prycop