It worked

waited 48 hours and the download speeds have doubled.
Test1 comprises of Best Effort Test: -provides background information.
IP profile for your line is - 1000 kbps
DSL connection rate: 448 kbps(UP-STREAM) 1664 kbps(DOWN-STREAM)
Actual IP throughput achieved during the test was - 921 kbps

I'm now getting about 120KBps.

Thanks a lot Colin.

I'll try the mater socket tomorrow to see if I can get over 1728Kbps for a profile of 1500Kbps

Just plugged the router into the master socket and got a sync speed of 1728Kbps.

Within 5 minutes my IP profile was updated to 2500Kbps with these results:

Test1 comprises of Best Effort Test: -provides background information.
IP profile for your line is - 2500 kbps
DSL connection rate: 448 kbps(UP-STREAM) 1728 kbps(DOWN-STREAM)
Actual IP throughput achieved during the test was - 1408 kbps

I'm very happy now and can get download speeds of 180KBps (which is 3 times faster than yesterday)

Thanks

Dunno how the profile changed to 2500 when your syncing at 1728, and for them to change the profile speed within 5 minutes of your router syncing at a higher rate is very good, I have to wait a stupid 3 days if my router loose's speed.

Glad to see you're making progress and tripled your speed.

Your new IP profile appears to be an anomaly as you should be syncing from 2848KBPS to get that figure. I have also had an IP value shown higher than sync once before.
I would guess that your IP profile is actually 1500Kbps but the checker has misreported it at 2500Kbps.

When I first got my Hub it was only connectiing at about 1Mbps and when I transferred the connection to the master socket it went to over 3Mbps.
I resolved that issue by removing the bell wires from the extensions and I also now use a filtered faceplate.

Edited by colin1409 (Tue 06-Mar-07 20:26:49)