|
I have notice port 8081 is open,
when i connect to it externally it is going to a authentication page
"HuaweiHomeGateway"
I assue this is for BT to access the HG612 modem?
I have unlocked the firmware and can firewall it off.... but i do not know the username or password of this!!!
|
|
Possibly TR-069 for CWMP http://en.wikipedia.org/wiki/TR-069
Mine is "closed" as I disabled the service on 301.
I have unlocked the firmware and can firewall it off.... but i do not know the username or password of this!!! If you go to the Maintenance/Account tab, there are only 2 accounts defined - admin and user.
______________________________________________________________________________ this is not usenet __________________
Edited by BatBoy (Tue 10-Apr-12 08:54:31)
|
|
Open on WAN or LAN side?
Given the modem does not receive a WAN IP it should not be visible to the internet.
|
The author of the above post is a thinkbroadband staff member. It may not constitute an official statement on behalf of thinkbroadband.
|
Register (or login) on our website and you will not see this ad.
|
|
WAN side - there's a PTM running on VLAN 301 for TR-069 which does DHCP.
______________________________________________________________________________ this is not usenet __________________
|
|
I presume you superglue the covers onto the diagnostic ports for your car too?
|
The author of the above post is a thinkbroadband staff member. It may not constitute an official statement on behalf of thinkbroadband.
|
|
And it will NOT have a public IP address, but a non-routeable private IP, so unless someone hacks into the DSLAM it should not accessible
If people are hacking the DSLAM/MSAN then the admin port on your modem is the least of your worries
|
The author of the above post is a thinkbroadband staff member. It may not constitute an official statement on behalf of thinkbroadband.
|
|
Well, it will have the public ip address of the modem on port 8081 as the OP said. I don't think it has anything to do with the DSLAM.
______________________________________________________________________________ this is not usenet __________________
|
|
The modem hands a public IP address to the consumers router, are you suggesting that the Openreach FTTC modem also has a public IP address?
Proof?
|
The author of the above post is a thinkbroadband staff member. It may not constitute an official statement on behalf of thinkbroadband.
|
|
Yes, it has the same ip address, but you have to specify the port as well to access it from the internet.
The proof is as I said before - there's a PTM service defined on VLAN 301 for TR-069.
______________________________________________________________________________ this is not usenet __________________
|
|
So tell me the IP address of a FTTC modem and I'll see if port 8081 is visible
|
The author of the above post is a thinkbroadband staff member. It may not constitute an official statement on behalf of thinkbroadband.
|