FTTP - Powerline adapter from ONT to Hub?

Possibly silly question time - I'm looking to move my hub so it's some distance away from the ONT.

I'll eventually run an ethernet cable under the floorboards but, in the meantime, can I use Powerline adapters to connect my ONT to the Hub. ie: ONT > powerline adapter --- second powerline adapter > Hub?

In reply to a post by Ciderboy67:

Possibly silly question time - I'm looking to move my hub so it's some distance away from the ONT.

I'll eventually run an ethernet cable under the floorboards but, in the meantime, can I use Powerline adapters to connect my ONT to the Hub. ie: ONT > powerline adapter --- second powerline adapter > Hub?

I believe you can but it would be madness to do it.

Have seen it working .... but it doesn’t work well.

Used that setup here for a while pending installation of CAT7 cable It worked but cut the tripe out of the speed.

In reply to a post by tedsloan:

Used that setup here for a while pending installation of CAT7 cable It worked but cut the tripe out of the speed.

Some more Dunning–Kruger at work. Only idiots use Cat7 cable.