User comments on ISPs
  >> BT Broadband


Register (or login) on our website and you will not see this ad.


These posts have been archived and can no longer be replied to or modified.
  Print Thread
Standard User stevemaskrey
(newbie) Sat 18-Nov-06 08:46:01
Print Post

Settling in Speed Process


[link to this post]
 
I have just migrated to BT Total Broadband in the past 48 hours from Andrews & Arnold, connecting it last night when I got home.

When I went to bed last night the downstream was 5,696k and upstream 448k. This morning the downstream is 5,376k and upstream the same from memory.

I remembered that our burglar alarm signalling / dialling sits hardwired across the incoming line so this morning removed it with a plan to put it on the phone side of the filter so that there is only the master socket then one filter before the house (and alarm) wiring. Removing the alarm dialler improves the noise margin (and possibly / probably reduces attenuation) partly I think because the dialler is just a relay on the end of c4m of cheap non-twisted pair cable with the wrong characteristics. I'd experimented with this on my previous service and found

My main question is; does the 10 day speed settling in process only start from the highest figure and work down? If so can I get BT to start / reset the process to start again. I'm in a rural area and was originally refused 512k service c2.5yrs ago.

Will it help to actually install the HomeHub as I'm still using my existing BT 2Wire router because it gives all of the stats, particularly with the 'hidden' management info.

These are the stats from my existing 2Wire / BT router:

Downstream Rate: 5376 kbps

Upstream Rate: 448 kbps

Channel: Interleaved

Current Noise Margin: 6.0 dB (Downstream), 22.0 dB (Upstream)

Current Attenuation: 32.0 dB (Downstream), 25.5 dB (Upstream)

Current Output Power: 19.0 dB (Downstream), 12.0 dB (Upstream)

Detailed stats as follows from a reset last night at 2300hrs:

Collected for 9:57:31

ATM Since Reset Current 24-Hour Interval Current 15-Minute Interval Time Since
Last Event


Cell Header Errors: 2636 2636 9 0:02:23

Loss of Cell Delineation: 11 11 0 1:15:42


DSL

Link Retrains: 3 3 0 1:13:33

DSL Initialization Errors: 0 0 0 0:00:00

Initialization Timeouts: 0 0 0 0:00:00

Line Search Initializations: 0 0 0 0:00:00

Loss of Framing Failures: 11 11 0 1:15:42

Loss of Signal Failures: 11 11 0 1:15:42

Loss of Power Failures: 0 0 0 0:00:00

Loss of Margin Failures: 3486 3486 0 1:15:42

Cumulative Seconds w/Errors: 250 250 7 0:02:23

Cumulative Sec. w/Severe Errors: 24 24 0 1:15:42

Corrected Blocks: 1325332 1325332 20034 0:00:01

Uncorrectable Blocks: 3771 3771 9 0:02:23

DSL Unavailable Seconds: 170 170 0 1:13:26

ISP Connection Establishment: 2 2 0 1:13:24


Steve
Chester
Standard User deleted
(deleted) Sat 18-Nov-06 10:54:14
Print Post

Re: Settling in Speed Process


[re: stevemaskrey] [link to this post]
 
Not much wrong there.
  Print Thread

Jump to