loosin connection

Spoke to BT, no line problems, but i get disconnects every few mins. See below


ATM Cell Header Errors: 3993 3993 1693 0:00:30
ATM Loss of Cell Delineation: 3979 3979 1686 0:00:30
DSL Link Retrains: 23 23 10 0:00:29
DSL Training Errors: 4 4 4 0:02:06
DSL Training Timeouts: 0 0 0 0:00:00
DSL Loss of Framing Failures: 44 44 18 0:00:30
DSL Loss of Signal Failures: 2 2 2 0:03:54
DSL Loss of Power Failures: 0 0 0 0:00:00
DSL Loss of Margin Failures: 2 2 2 0:03:54
DSL Cumulative Errored Seconds: 83 83 35 0:00:30
DSL Severely Errored Seconds: 73 73 29 0:00:30
DSL Corrected Blocks: 4045 4045 1707 0:00:30
DSL Uncorrected Blocks: 3957 3957 1680 0:00:30
ISP Connection Establishment: 1 1 1 0:01:45

Can you borrow another modem to see if that stays connected? Have you tried using the test socket within modern BT master sockets? That might show that you have an error in your internal wiring or kit.

Not tried a router yet, face please is fine, its got to be the router. I hope

What router are you using? What is your sync, SNR and attenuation?

Bt+ busniess hub, with 2wire firmware, all was ok till a few days ago, sync emm its all over the place from 200/448 to 6600/448 always 448 upstream.

DSL Line (Wire Pair): Line 1 (inner pair)
Protocol: G.DMT Annex A
Downstream Rate: 5728 kbps
Upstream Rate: 448 kbps
Channel: Interleaved
Current Noise Margin: 20.0 dB (Downstream), 18.0 dB (Upstream)
Current Attenuation: 36.9 dB (Downstream), 21.5 dB (Upstream)
Current Output Power: 19.8 dBm (Downstream), 12.1 dBm (Upstream)
DSLAM Vendor Information: Country: {0xB5} Vendor: {TSTC} Specific: {0x00}
PVC Info: 0/38

Edited by coleco82 (Sun 27-Jul-08 18:32:03)