Yes but the HH3 is specifically marketed with an intelligent wireless routine which will automatically switch to cleaner channels (except it doesn't work).

As are a lot more of them!

All the HH3s probably do a rescan at the same time, then all move to Ch11 then do a rescan, sse it is busy and the Ch1 is free so return to there!

I can concur most of the wireless speed issues can be solved by manually selecting a wireless channel thats away from the rest, plenty posts on here about this issue. However if your in an area that has alot of wireless channels nearby your snookered Fact of the matter is wireless is not the best judge of speed issues on the line. For clarity my Be speeds were rubbish in the beginning and all of it was down to the wireless router supplied and the way it was configured. Not keen on all this automatic configuration stuff, not enough control for the user.

In reply to a post by MrGrumpy:

Fact of the matter is wireless is not the best judge of speed issues on the line.

Fortunately I only use wireless for my iPhone, Android tablet and my work laptop.
Everything essential is on a wired connection.
Not a big fan of wireless (mainly because it always seems to be useless).

Same.

We do have an apple airport express thing connected to the hub which seems to work a treat. Still used wired...it's always right.

In reply to a post by MHC:

In reply to a post by reme8488:

When we get rid of Sky we will all be able to be online at the same time - doing what we all normally do & do it without any stuttering or stammering.

Make sure the wife and daughters are all connected wirelessly and you are wired. Set the wireless connection to a 11Mbps maximum rate and you will be fine.

Everyone's connected to my BT connection and I'm the only one connected directly to the hub - everyone else is connected via wifi (my laptop & pad also connected via wifi.) & no problems at all .... not that I expected any problems.