In reply to a post by Renfrew:

I've reverted to 1.0.4.98 until such time as the final version of 1.0.16.98 is issued by Netgear, but I'm interested to hear of others' experiences. What settings do you use for DNS?

My router updated itself automatically to 1.0.7.98 the first time I switched it on. I have never had any problems with it at all since that time. I have also been reading the long thread about 1.0.16.98 and have decided not to try it out.

My DNS settings currently are

Domain Name Server (DNS) Address

Use These DNS Servers
Primary DNS 8.8.8.8
Secondary DNS 194.74.65.68

In reply to a post by Renfrew:

In reply to a post by Ellios:

Running a Netgear WNDR3700 router alongside the BT Openreach modem ......

Just out of interest, which release of firmware are you using for the WNDR3700 and is the router v1?

I'm using the same as previous poster Squirrel, a version 1 router

Hardware Version WNDR3700
Firmware Version V1.0.7.98
GUI Language Version V1.0.0.64

I'm not experiencing any of the issues mentioned in the link you provided, sometimes the Blackberry's used in the house fail to pick up the wireless network, but this is not uncommon elsewhere outside of the house flakey RIM software I think...

In reply to a post by Squirrel:

In reply to a post by Renfrew:

I've reverted to 1.0.4.98 until such time as the final version of 1.0.16.98 is issued by Netgear, but I'm interested to hear of others' experiences. What settings do you use for DNS?

My router updated itself automatically to 1.0.7.98 the first time I switched it on. I have never had any problems with it at all since that time. I have also been reading the long thread about 1.0.16.98 and have decided not to try it out.

My DNS settings currently are

Domain Name Server (DNS) Address

Use These DNS Servers
Primary DNS 8.8.8.8
Secondary DNS 194.74.65.68

Many thanks to both you and Ellios. It is obvious that the alleged problems do not affect everyone. Perhaps I will simply allow the router to upgrade itself. My use is far from unusual with, currently, but one wireless netbook in use capable only of 54Mbps. I note that Ellios has used both Google DNS and BT DNS without problems and he is also on 1.0.7.98 firmware.

In reply to a post by Renfrew:

My use is far from unusual with, currently, but one wireless netbook in use capable only of 54Mbps

My setup is far more complex than yours - but I have never had a single problem with the router

Router is connected to the OR VDSL modem, with output to an 8 port Gb switch and a Devolo 500Mbps homeplug device. Downstairs the other homeplug connects to a Netgear 5 port AV router feeding a PS3, Wii and Boxee Box.

I have permanent connections from the 8 port Gb switch to the following

Dell XPS420
HP Proliant Microserver
Win XP tower
Vodafone Sure Signal
Synology NAS
O2 Joggler
Lexmark Network Printer

Then wirelessly there are regularly 5 laptops, one connects at 300Mbps over 5Ghz, others usually about 150Mbs on the 2.4Ghz band. My Nokia N900 is also usually connected when I am in and there is a spattering of iPhones as the family comes and goes.

No router problems whatsoever though.

In reply to a post by Squirrel:

In reply to a post by Renfrew:

My use is far from unusual with, currently, but one wireless netbook in use capable only of 54Mbps

My setup is far more complex than yours - but I have never had a single problem with the router

Router is connected to the OR VDSL modem, with output to an 8 port Gb switch and a Devolo 500Mbps homeplug device. Downstairs the other homeplug connects to a Netgear 5 port AV router feeding a PS3, Wii and Boxee Box.

Indeed. Apart from my wireless netbook, the router is only connected to one Solwise Homeplug AV (200Mbps) which is in turn connected to two other Homeplug AV devices. I have a desktop, a Home Theatre PC, a TV and a Blu-Ray player connected via the homeplugs and all of which are remote from the router. Now that No. 1 son has moved into his own home the demands on my network have reduced considerably.

I suspect that I'll either have to upgrade the homeplugs or install cat 5e everywhere, when BT upgrade infinity to "up-to" 80 Mbps. I've just upgraded my WNDR3700v1 to 1.0.7.98 and to first appearances all appears OK. The IP6 might come in useful later if I decide to migrate to Goscomb or A&A, but I have a lot of reading-up to do first.

I used homeplugs across my house until recently, I found them to be reasonable but ultimately decided to run cat5e to each room either directly off the router or from switches

once you get going running cables around the home doesn't take too long and I'm happier now it's done

I hope you have trouble free usage from your Netgear Router

In reply to a post by Ellios:

once you get going running cables around the home doesn't take too long and I'm happier now it's done

The "wife test" is always the biggest hurdle to running Cat5! I'd happily have my house looking like a datacenter with raised flooring but apparantly it's not acceptable and I'm in the doghouse for suggesting it!

In reply to a post by Adamant:

The "wife test" is always the biggest hurdle to running Cat5! I'd happily have my house looking like a datacenter with raised flooring but apparantly it's not acceptable and I'm in the doghouse for suggesting it!

See you haven't gone about it the right way. I am currently having all our ceilings replaced which means I have access to the space between the ceiling and floor above - best time to run the cables cos missus attention is diverted by the home improvements