User comments on ISPs
  >> BT Broadband


Register (or login) on our website and you will not see this ad.


Pages in this thread: 1 | 2 | [3] | (show all)   Print Thread
Standard User deleted
(deleted) Mon 06-Feb-12 11:30:04
Print Post

Re: Anyone from BT care to explain these speeds please?


[re: deleted] [link to this post]
 
No it isn't, I expect those lower values because the computer with the wireless connection is 3 brick walls away from the hub, and I can't run ethernet to this room, but it my main computer.

The ethernet connected system is right next to the hub, and this was also giving me download speeds of 760K and upkoads of 8800K (ie 0.76 megs and 8.8 megs).

Nothing was changed anywhere ... clearly a problem with the BT network, which has resolved itself and everything is fine without me having to do anything (except mutter and moan!).

Makes a change for things to fix themselves, rather than to worry about valves overheating etc, which was the case when I first started computing in the 1960's.

Given the other reports of problems on the BT network, various sites being unreachable (e.g. BBC, Thomas Cook etc), and high pings in some regions (I had one ping to Manchester (from York) of 206ms, usually 15ms)., I suspect that a router (or a route) had gone down or became misconfigured (or a failover system didn't get the routing quite right etc ...).

There was also a problem in the Sheffield area which affected York phone numbers (according to the list of dialling codes affected) - and when this was fixed, and a reboot of the HH3, things were OK again - I also had a very different IP assigned to me as well.

So, all in all, a BT network issue, not my systems or my wireless.

The main gripe really is that the India response team had not been informed of the network problem which was affecting my dialling code, so I am getting an engineer visit. Oh well, he can double check everything is OK after the installation last November!
Standard User deleted
(deleted) Mon 06-Feb-12 18:30:10
Print Post

Re: Anyone from BT care to explain these speeds please?


[re: deleted] [link to this post]
 
In reply to a post by RobFlet:
No it isn't, I expect those lower values because the computer with the wireless connection is 3 brick walls away from the hub, and I can't run ethernet to this room, but it my main computer.

The ethernet connected system is right next to the hub, and this was also giving me download speeds of 760K and upkoads of 8800K (ie 0.76 megs and 8.8 megs).


Oh, I see.

That's not what you said in the post of yours I quoted, hence my reply.

If you're getting the same over ethernet and on BT Speedtester it sounds like local VP congestion. This is something BT Wholesale have to investigate at exchange level. It might also be a faulty port or line card in the cab.

Edited by deleted (Mon 06-Feb-12 18:30:43)

Standard User XRaySpeX
(eat-sleep-adslguide) Mon 06-Feb-12 19:07:44
Print Post

Re: Anyone from BT care to explain these speeds please?


[re: deleted] [link to this post]
 
In reply to a post by izools:
That's not what you said in the post of yours I quoted, hence my reply.
You quoted and read 1 line too short:
In reply to a post by RobFlet:
ON ethernet .. usually 37.5 down and 8 up ...

At this moment in time ... http://speedtest.net/result/1749950324.png


1999: Freeserve 48K Dial-Up => 2005: Wanadoo 1 Meg BB => 2007: Orange 2 Meg BB => 2008: Orange 8 Meg LLU => 2010: Orange 16 Meg LLU => 2011: Orange 19 Meg WBC


Register (or login) on our website and you will not see this ad.

Standard User deleted
(deleted) Mon 06-Feb-12 21:00:55
Print Post

Re: Anyone from BT care to explain these speeds please?


[re: XRaySpeX] [link to this post]
 
Yup, as I said ... on ethernet is was also really bad.

But it has fixed itself and all is back as it should be. So either there was a wider problem on the BT internet, or some magic fairy climbed into the cabinet and fixed the port wink

Anyways, I expect the OR engineer tomorrow (8am - 1pm) will check things ...

Cheers,

Rob
Pages in this thread: 1 | 2 | [3] | (show all)   Print Thread

Jump to