No, it doesn't any more!

Strangely enough since switching it hasn't Wish it did could then work out the 'true sync' easier

Please post you router stats verbatim to go with that.

Yes, on 20CN the BT speedtester did show the "DSL Connection Rate".

Perhaps that proves that you have been physically moved from 20CN ket to 21CN kit.

In reply to a post by XRaySpeX:

No, it doesn't any more!

That a shame not having a DSL connection rate - guess we will just have to work with the numbers reported by the BT router.

After a couple of weeks if there is no significant improvement it would be interesting to use a DMT compatible router and check for any tone gaps plus, of course, verification of the reported stats including error rates.

Which should have eliminated any issues at the exchange end, including anything to do with the line card....

Stats below:

Line state: Connected
Connection time: 1 days, 00:34:51
Downstream: 15.7 Mbps
Upstream: 888.9 Kbps


ADSL Settings
VPI/VCI: 0/38
Type: PPPoA
Modulation: G.992.5 Annex A
Latency type: Interleaved
Noise margin (Down/Up): 9.4 dB / 12.0 dB
Line attenuation (Down/Up): 6.2 dB / 3.3 dB
Output power (Down/Up): 20.0 dBm / 10.6 dBm
FEC Events (Down/Up): 24 / 169
CRC Events (Down/Up): 0 / 32
Loss of Framing (Local/Remote): 0 / 0
Loss of Signal (Local/Remote): 0 / 0
Loss of Power (Local/Remote): 0 / 0
HEC Events (Down/Up): 0 / 11
Error Seconds (Local/Remote): 4 / 0

True sync, urm - log into the router and viola it will be there

Forlorn hope but does router show sync speeds anywhere else, preferably in diff units?

That Down Sync does not gel with the IPP, which I trust from experience.

Edited by XRaySpeX (Tue 26-Mar-13 17:19:34)

Then why is IPP of 14.18 / Sync of 15.7 = 90.3% and not 88.2%?

You said earlier that IPP follows Sync instantly.

DSL just re-synced, now at 16.13Mbps A slight improvement, I'm now at least within the 16-19Mbps predicted by BT