VigorStats program for Vigor 2800

Frustrated by the lack of stats in SNMP for the 2800 series, I have created a small data collector, which will fill in the gaps until Draytek add extra information into the MIB.

It needs to run on a windows client PC. More information and download here:

http://vigorstats.blogspot.com/

Edited by deleted (Fri 16-Jun-06 09:58:10)

Sounds good.

Will it work on the 2600 series?

Probably not, I don't have one to try.

If however you could send me the output from the CLI command "show adsl" I can see how difficult it would be to make a 2600 version.

> show adsl

  --------------------------- ATU-R Info (annex A) ----------------------------

   Running Mode            :    G.DMT       State                : SHOWTIME

   DS Actual Rate          :   576000 bps   US Actual Rate       :   288000 bps

   DS maximum Rate         :  7776000 bps   US maximum Rate      :   448000 bps

   DS Path Mode            :  Interleave    US Path Mode         :        Fast

   NE Current Attenuation  :    38.0  dB    Cur SNR Margin       :    26.0  dB

   DS actual PSDM(C)       : 00000007       US actual PSDM(R)    : 00003e77

   ADSL Firmware Version   : 41e2be2c

  -------------------------------- ATU-C Info ---------------------------------

   Far Current Attenuation :    22.0  dB    Far SNR Margin       :    10.0  dB

   CO ITU Version[0]       : 00b55453       CO ITU Version[1]    : 54430000

   DSLAM CHIPSET VENDOR    : < TI >

  -----------------------------------------------------------------------------

   INTL, DSTREAM bytes/depth=   1, symbols/codewords  =   0, latency= 0*0.25ms.

       , USTREAM bytes/depth=   1, symbols/codewords  =   0, latency= 0*0.25ms.

   CODE, DSTREAM fast parity bytes=   0, fast codeword=  19.

         DSTREAM intl parity bytes=   0, intl codeword=   0.

   CODE, USTREAM fast parity bytes=   0, fast codeword=  10.

         USTREAM intl parity bytes=   0, intl codeword=   0.

   Setting>>

       FDQ : Enable, TCM : Enable, EC : Disable, Framing Mode : 3.

   Running>>

       FDQ : In Use, TCM : In Use, EC :    Off.

       DS : Framing Mode 0,1,2, US : Framing Mode 3.

   ADI ADSL Firmware Version: 41e2be2c

>

Why doesn't ADSLguide handle [ pre ] or [ code ] tags properly?

Edited by Sandgrounder (Fri 16-Jun-06 19:22:18)

Sorry, it's too different, it would take me too much time for the re-write.

Any chance you could share your source, I'd link something like this for my Linksys

Sorry.

New version 4.3 Now records bits encoded per bin over time so you can produce your own spectrum analysis graphs.

http://vigorstats.blogspot.com