Technical Discussion
>> DSL Hardware Discussion

These posts have been archived and can no longer be replied to or modified.
	Print Thread

Kiro
(committed) Tue 03-Apr-07 17:11:52

ATM int on Cisco Router

[link to this post]

I've got a strange ADSL problem that has left me scratching my head. I've got a 2mbit ADSL (datastream based) that is connected to Cisco 3825. The main ATM interface ATM0/3/0 is up/up and the ADSL is in sync (with good figures), but the sub-int is down/down. When I look at the PVC on the router (sh atm pvc 0/38) the router displays the following: Status: DOWN, State: NOT_VERIFIED. I'm going to report it out to NTL but I was wondering if anyone has any ideas?

egg_box
(newbie) Tue 03-Apr-07 17:30:04

Re: ATM int on Cisco Router

[re: Kiro] [link to this post]

Which network modules / wan cards are you using?

_________________________________
SkyBroadband 8mbit (Connect Package)
Exchange - Bangor (N.Ireland) | Line Length (sight): 0.06km | Line Length (cable): 0.062km
Line Sync - Downstream: 8128kpbs | Upstream: 448kpbs
Attenuation - Downstream: 13db | Upstream: 7db
Margin - Downstream: 16db | Upstream: 29db

Kiro
(committed) Wed 04-Apr-07 17:20:17

Re: ATM int on Cisco Router

[re: egg_box] [link to this post]

According to our parts department it's simply a WIC1 ADSL card. That said I think I've discovered why the sub-int is down. I checked our CAL (POP) router and the ATM there is down/down as well saying the PVC there can't be verified, so that's something else for me to look into tomorrow.

Kiro
(committed) Thu 05-Apr-07 23:58:19

Re: ATM int on Cisco Router

[re: Kiro] [link to this post]

Ended up being a simple fix. Simply did a shut/no shut on the interface and it came up.

Print Thread

Jump to