DG834 v2 Telnet

I am using the following commands to Telnet into my DG834 v2.

Open browser & type > -- http://192.168.0.1/setup.cgi?todo=debug
This returns in web browser: 'Debug Enable!'

Then --
Start > Run > type 'cmd'
In the DOS window type: Telnet 192.168.0.1

This returns:
BusyBox v0.61.pre (2005.09.27-08:20+0000) Built-in shell (ash)

The Telnet window then opens into which I type: cat proc/avalanche/avsar_modem_stats

This all works fine & the results (well the last part) are shown in the Telnet window.

I have 2 questions please

1. How can I copy the full results from the Telnet window.
2. To exit the Telnet window, is there a particular command to use ie type

1. right click ->edit -> select all in window bar. Paste into other app.
2. q or quit

In telnet enter ? to get a list of commands

edited to answer 1)

Edited by deleted (Wed 04-Apr-07 11:31:10)

Many thanks. Ok I see what my problem was, in Preferences the line count was set to the default 25. Have set it to 80 and now the full data is now listed.

Cheers