|
|
|
Hi We've been informed by an Openreach engineer that Billion routers are even better for longer lines than 2wires. So can anyone direct me to the best Billion router, It needs to be Wireless N and give as good or better sync speeds than the business hub. I was looking at the 7700N but this seems to be cheaper than all the others, which concerns me slightly?
Kind Regards
Edd
|
|
|
Yes Broadcom chipsets are known to be very good on long lines, whether the Billion 7800N or 7700N (both with Broadcom 6358 chipset) is better than the Business Hub BT 2700HGV is debatable. If you're on a very long line then it might be better to go for the 2700HGV otherwise go for the Billion. The 7700N is cheaper than the 7800N because it doesn't have gigabit ports or EWAN port (for FTTC/cable connections), everything else is the same.
http://www.amazon.co.uk/Billion-BiPAC-7700N-Wireless...
Edited by deleted (Wed 27-Apr-11 22:40:47)
|
|
|
|
Well we have the Business HUb at the moment, and even that drops the connection 4 times a day. And our netgear DGN2000 even with the DGTEam firmware, was rubbish!
Ohh btw our line downstream attenuation is 109.
And we sync around 1000kbps with an IP Profile of 750.
|
|
Register (or login) on our website and you will not see this ad.
|
|
|
|
DO Billions show the right line attenuation or the one's like at max 63.5db?
|
|
|
In reply to a post by Anonymous: Well we have the Business HUb at the moment, and even that drops the connection 4 times a day. And our netgear DGN2000 even with the DGTEam firmware, was rubbish!
Ohh btw our line downstream attenuation is 109.
And we sync around 1000kbps with an IP Profile of 750.
Wow, your line downstream attenuation is 109. I have not seen it given that high before, interesting does the BT Business Hub 2Wire give a reading that high?
I would hope the connection is interleaved for stability.
If you buy the Billion, you could tell us which works best on a long line.
http://www.billion.uk.com/product/wireless.htm
|
|
|
|
What the router reports is only 65, yet the engineer worked it out properly and has put in for a recalculation and said it was 13.8dB per km, and our line length is 7.9km long, and he did something with his machine, the only reason I posted this was because he said they were even better than his peice of kit.
|
|
|
Well in that case go for the Billion 7700N when its released in a few weeks time. Buy it from Amazon, if after a week or two you're still getting disconnections then return it to Amazon for a refund, so you haven't wasted your money
|
|
|
|
You have just identified my new spare router - the 7700N is exactly what I need as a backup to my DG834Gv4
|
|
|
You have just identified my new spare router - the 7700N is exactly what I need as a backup to my DG834Gv4
Why not make the DG834Gv4 as backup to the 7700N? The billion uses a newer broadcom chipset (6358 rather than Netgear's 6348), also has wireless N and allows you to alter the SNR (permanent setting even after reboot). You might be pleasantly surprised
|
|
|
|
At present the Netgear is performing faultlessly with a default noise margin of 6dB so no need to change.
I don't think my line will support 5120kbps (needed to get to the next IP profile as it is holding 4896kbps at present with the noise margin dropping to about 2.8dB over night
|