7.09 available here

Thanks!:)

Ok, I've just run 7.09 and it won't display the graphs for my ST510v4!

Is it because it's not a 516 or somethin?

Just thought the graphs would be interestin to check for outside noise etc.

Edited by wolvesmad (Wed 31-May-06 09:58:11)

I can't the graphs to show on 7.09 or 7.11..............Is it because I have the 510v4 or have I not clicked on something?

Thanks

It performs ok. I did try a voyager 2110 which had SNR of 10 db on my Max line, the 510 sits at 5.5-6 db. DMT can't show the graphs for the 510 because of the chipset type.

I have heard that the 4.2 firmware gives a 3 db higher SNR and doesnt suffer the high first hop in traceroutes.

Is the 510v4 as bullet proof on max as it is on fixed line services??

If my SNR on a 2Mb service is 20db during the day.................what could I achieve by tweaking?

7Mb? Also what about night time, when it's about 17db?

Thanks to the instructions all working well but how do I stop DMT timing out

Check the Misc. Options.

New DMT Modem Tool is out

DMT v7.15

added: latency/delay-info in ms (for fast or interleaved path/channel) 

added: ability to activate experimental area (last tab) 

Wolvesmad you may have trouble with the 510 at those SNR rates. When I was on 2 Meg I had a steady 28 db night and day, and on max it has dropped to 6 db. Rock solid for me but I think you will have to suck it and see.

Edited by Banger (Thu 01-Jun-06 17:02:24)

Already did and couldn't see anything there.
Only thing which may affect it is Send Keep Alive Signal - set at 95 secs

Problem is with the router - telnet timeout is set to 120 secs.
Have changed the Keep Alive Signal to 60 secs - lets see if that fixes it.

Edited by deleted (Thu 01-Jun-06 17:12:48)

Telnet into the router and type:

env set var=SESSIONTIMEOUT value=0

saveall

Edited by JinxterX2 (Thu 01-Jun-06 17:30:24)