Technical Discussion
  >> DSL Hardware Discussion


Register (or login) on our website and you will not see this ad.


Pages in this thread: 1 | [2] | 3 | 4 | 5 | (show all)   Print Thread
Standard User Ixel
(regular) Tue 11-Sep-12 19:19:00
Print Post

Re: Fritzbox 7390 or similar question


[re: DougM] [link to this post]
 
Let me/us know how you get on smile.
Standard User camieabz
(sensei) Tue 11-Sep-12 20:44:13
Print Post

Re: Fritzbox 7390 or similar question


[re: DougM] [link to this post]
 
In reply to a post by DougM:
I was perfectly happy with the stability at 6dB (hours/days between drops). My ISP resets it on request, but it quickly creeps-up again.

I know there is no option in the GUI, but perhaps the command-line? I must plug-in a phone so I can activate it smile


Give the faults team a call and explain the problem of the DLM changing the SNR. They might be able to help out with that.

~ Camieabz ~

All Connection Data ~ Some plusnet links

mod'er·a'tion n.
Synonyms: temperance, restraint, modesty.
Standard User Ixel
(regular) Tue 11-Sep-12 21:08:13
Print Post

Re: Fritzbox 7390 or similar question


[re: Ixel] [link to this post]
 
Well, setting up the public static IP's wasn't as bad as I thought. All I had to do was set the router to use the final public IP in my range that was given to me, disable NAT and then setup my devices to use a public IP in the usable range along with the gateway IP being my router public IP. No messing around with static routing was necessary.


Register (or login) on our website and you will not see this ad.

Standard User DougM
(member) Tue 11-Sep-12 22:03:04
Print Post

Re: Fritzbox 7390 or similar question


[re: Ixel] [link to this post]
 
I successfully reduced my SNR margin by 6dB. I didn't enable telnet, instead I used FBEditor to download, edit and upload the configuration.

http://www.ip-phone-forum.de/showthread.php?t=79513

I changed the downstream margin offset to -60 from 0:

DownstreamMarginOffset = -60;

The GUI still reports the SNR margin as 12dB but my downstream sync has jumped back up to 3Mbps.

-==-
DougM
Standard User Ixel
(regular) Tue 11-Sep-12 22:18:58
Print Post

Re: Fritzbox 7390 or similar question


[re: DougM] [link to this post]
 
Interesting. I haven't tried telnet yet, though am reluctant as I've heard it invalidates the warranty. Though on the other hand I've heard that you can use a firmware recovery tool which will remove knowledge of telnet access from the router? Telnet may also give you the correct SNR on the connection.

EDIT: The configuration file has some interesting options, very advanced options. For example:
MaxDownstreamRate = 0;
MaxUpstreamRate = 0;

I imagine with those you could specify a sync rate limit, so if I did 60000 for downstream then whenever I sync I would never go beyond 60000 even if the DSLAM allowed me to?

Edited by Ixel (Tue 11-Sep-12 22:31:01)

Standard User Ixel
(regular) Wed 12-Sep-12 10:05:41
Print Post

Re: Fritzbox 7390 problem?


[re: Ixel] [link to this post]
 
I have an odd problem that I've noticed this morning. When I use my phone now I notice a 3dB~ SNR drop, once I've hung up it goes back up by the amount that was lost. My only guess is that it's the special Y cable supplied with the Fritzbox 7390 frown. Any ideas? This only happens in the receive direction, not the send direction.

Edited by Ixel (Wed 12-Sep-12 10:19:23)

Standard User deleted
(deleted) Wed 12-Sep-12 10:37:13
Print Post

Re: Fritzbox 7390 problem?


[re: Ixel] [link to this post]
 
In reply to a post by Ixel:
I have an odd problem that I've noticed this morning. When I use my phone now I notice a 3dB~ SNR drop, once I've hung up it goes back up by the amount that was lost. My only guess is that it's the special Y cable supplied with the Fritzbox 7390 frown. Any ideas? This only happens in the receive direction, not the send direction.
Do you have a micro-filter you could plug into the phone side, so in effect you would double the filtering?
Standard User Ixel
(regular) Wed 12-Sep-12 11:00:10
Print Post

Re: Fritzbox 7390 problem?


[re: deleted] [link to this post]
 
Good suggestion but I am already double filtering. Something I do as standard tongue. I have taken two pictures of the SNR graph, one with phone in use and one without phone in use.

Phone not in use (SNR increase/normal):
http://i.imgur.com/5mEi4.png

Phone in use (SNR drop/not normal):
http://i.imgur.com/pIXKt.png
Administrator MrSaffron
(staff) Wed 12-Sep-12 11:39:38
Print Post

Re: Fritzbox 7390 problem?


[re: Ixel] [link to this post]
 
I cannot see a difference, sure you did not mess the image upload up?

Andrew Ferguson, [email protected]
www.thinkbroadband.com - formerly known as ADSLguide.org.uk
The author of the above post is a thinkbroadband staff member. It may not constitute an official statement on behalf of thinkbroadband.
Standard User deleted
(deleted) Wed 12-Sep-12 11:41:38
Print Post

Re: Fritzbox 7390 problem?


[re: MrSaffron] [link to this post]
 
If you open them in two separate tabs and swap between them, you will see the yellow area rise and fall a little.
Pages in this thread: 1 | [2] | 3 | 4 | 5 | (show all)   Print Thread

Jump to