which fttc router.

Hi all.....
I was just about to buy a draytek 2850n router for my vdsl2 connection and i seen it only does up to 50mbps. Im on a 80/20mbps connection now. so my question is what is the best router to go for now or is the draytek still ok.........

Cheers
saboo

how do you know it only does 50mb ?

Because they advertise it only up to 50MBPS.........

have you tried a direct lan to your pc ?

I have a network running with Ethernet plugs so i need a router.......

In reply to a post by saboo1690:

Because they advertise it only up to 50MBPS.........

50Mb/s not MB/s!! there totaly differant things

from the tec specs...... Max. WAN Throughput in excess of 50Mb/s

Have i got this wrong then.......lol
so will the draytek 2850n be good enough for a 80/20mbps connection.......

if i read it right there suggesting throput, to put that in contex i only get 560Kb/s on a 4meg adsl connection so personaly i think the router would wipe the floor with a 80meg connection.

mind you i dont pretend to know for sure, theres several very well informed people here so they should be able to tell you if im wrong (or right).

The WAN throughput on 80/20 is around 100Mb/s, so you'll be losing half.

560 KB/sec is 560 * 8 = 4480 kilo bits per second