|
|
Just been connected to my local FTTC in Falkirk now accepting orders I am running at full 80/20 profile. I would like to access the stats from Huawei HG612 vdsl modem can anyone advise thank you.
Edited by deleted (Wed 17-Apr-13 21:47:16)
|
|
|
Take a look at the right hand side of this page: http://huaweihg612hacking.wordpress.com/
|
|
|
|
Good link thank you will get to unlocking, looks like FTTC dowload rates are capable in excess of 80mb connection speed currently in operation.
|
|
Register (or login) on our website and you will not see this ad.
|
|
|
Once you've unlocked the modem you can use the program in the following thread to read and graph the stats.
http://forums.thinkbroadband.com/fibre/f/4216317-hua...
|
|
|
|
Thank you all for the links very interesting stuff, managed to load the unlocked firmware and currently on full 80/20 sync. Max attainable is 104mb DL and 36mb UP, had a look at the graphs as well. however the connection seem to be working fine so I didn't want to mess around too much.
Uploaded the original firmware back in for moment, at least if I have any issues can revert back to debug.
Regards
|
|
|
Bad move! 
The time you need the graphs and the detailed log the graphing setup also keeps is when the connection has gone funny. Although reloading the unlocked firmware and reloading the graphing will tell you how things are, you will have no record of what happened on the way to it.
The degenerative stages are likely to be useful.
My broadband basic info/help site - www.robertos.me.uk | Domains,website and mail hosting - Tsohost.
Connection - Plusnet UnLim Fibre (FTTC). Sync ~ 54.2/15.2Mbps @ 600m. - BQM
"Where talent is a dwarf, self-esteem is a giant." - Jean-Antoine Petit-Senn.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Allergy information: This post was manufactured in an environment where nuts are present. It may include traces of understatement, litotes and humour.
|
|
|
very true.
I reccomend putting the firmware back on. Although I can understand why he is been cautious because its like not wanting to break whats working.
BT Infinity 2 Since Dec 2012
|
|
|
One problem for a lot of people is having a computer that's on 24/7 to log the stats.
I'm lucky as I have a server tat is always on, and it only draws about 40 - 50 watts, this has been logging my stats 24/7 since my connection went live.
|
|
|
That's fair enough. But even having it running when the computer is on is better than not at all.
Now there's a thought. Maybe I'll set up the old one by the router and modem to run the stuff, and access it through the LAN.
My broadband basic info/help site - www.robertos.me.uk | Domains,website and mail hosting - Tsohost.
Connection - Plusnet UnLim Fibre (FTTC). Sync ~ 54.2/15.2Mbps @ 600m. - BQM
"Where talent is a dwarf, self-esteem is a giant." - Jean-Antoine Petit-Senn.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Allergy information: This post was manufactured in an environment where nuts are present. It may include traces of understatement, litotes and humour.
|
|
|
One problem for a lot of people is having a computer that's on 24/7 to log the stats.
For me its not the cost of the power for a 24x7 log, its the noise it makes. I have a fairly small flat and most of my PCs have cases that vibrate a bit. If I had an old silent laptop (e.g. pent-M) then that could be a logger.
Or a hosted service could telnet in and grab stats on the WAN side.
James BT Infinity 2 19/09/2012 - Speeds 49 / 8.2 Mbps - Sync 53 / 9.5 Mbps @ 470m
Huawei modem -> RT-N66U -> Switch -> PC/Mac/Linux/NAS/Phone/TV - last speedtest
13 years of broadband - 1999 ntl:(512k/1M)/BTbusiness(2M)/Metronet(2M)/Bulldog(8M/16M)/BE(19M/16M)/BT FTTC(46M)
|
|
|
One problem for a lot of people is having a computer that's on 24/7 to log the stats.
I'm lucky as I have a server tat is always on, and it only draws about 40 - 50 watts, this has been logging my stats 24/7 since my connection went live. My server draws less than 10w. Nyah, nyah 
http://www.fit-pc.com/web/fit-pc/fit-pc2i-specificat...
|
|
|
All my PC's are virtually silent, one thing I can't tolerate is a noisy PC. Even my desktop PC which runs at 4Ghz with 2 x 680 Geforce cards is barely audible, until of course I start gaming or transcoding a video, even then it's not loud.
It's very easy these days to make a silent PC, and it needn't cost the earth either.
|
|
|
]My server draws less than 10w. Nyah, nyah
http://www.fit-pc.com/web/fit-pc/fit-pc2i-specificat...
Nice, but I wanted some processor power, and some space for some hard drives - currently have 7 fitted, with space for 15. Eventually it will be a TV recording server for the whole house, as well as hosting websites, email etc.
I've often wondered if a Raspberry PI could be set up to log the stats, very low power, small size, cheap to buy and it runs Linux, so should be easy for someone to set up who knows what they are doing with Linux.
|
Pages in this thread: 
Print Thread
