General Discussion
  >> Fibre Broadband

Register (or login) on our website and you will not see this ad.

  Print Thread
Standard User shaneosborne
(experienced) Fri 20-Sep-13 16:18:09
Print Post

HG612 Access Problems...

[link to this post]

I've unlocked my HG612 modem and all is setup and working LAN1.

The problem is that I can't access the UI.

I've tried on both LAN1 and LAN2 but it times out...

Can someone please help?

Thanks in advance
Standard User kasg
(fountain of knowledge) Fri 20-Sep-13 19:32:18
Print Post

Re: HG612 Access Problems...

[re: shaneosborne] [link to this post]
1. Are you sure you have unlocked it?
2. If you are connecting directly to the modem (LAN2), you need to specify your IP address, subnet mask and default gateway in your Network Adapter TCP/IPv4 properties, e.g. (example, could be anything in the last bit)

I have my LAN2 port connected to the router, which means you don't have to worry about all that, as long as the router and the modem have different addresses in the 192.168.1 subnet.


plusnet Unlimited Fibre - BQM
Using OpenDNS
Domains and web hosting with TSOHOST

Edited by kasg (Fri 20-Sep-13 19:34:12)

  Print Thread

Jump to