|
Hi all. FTTC openreach will shortly come to my area. The problem I have is that my master socket in in a totally useless position and I cant really plug my router into it. Instead my router is plugged into an extension socket that an electrician put in and I have a wired connection to my PC which has no wireless ability. BT tell me that with fibre I need to plug my router into the main socket only or else I need to have my main socket put elsewhere. Does anybody know if that is the case as I have had different advice from Orange. Can I plug my router into any of the extension sockets I have around the house?
|
|
There is the home wiring solution which you can ask for when ordering - which will as well as the master socket being converted give you a dedicated data extension (up to 30m of cable) away from the master socket.
|
The author of the above post is a thinkbroadband staff member. It may not constitute an official statement on behalf of thinkbroadband.
|
|
....... or if easier and/or more practical, the NTE can be shifted.
|
Register (or login) on our website and you will not see this ad.
|
|
This could result in slower sync rate.
plusnetADSL2+16 Meg
|
|
can the home wiring extension be used for network cabling rather than moving the modem ?
I have fttc being installed and I want to turn to cat5/6 rather than homeplugs
Edited by Stanman_24 (Mon 16-Dec-13 11:38:18)
|
|
If it is 4 pair Cat5e then yes, you need to get up to speed on crimping connectors.
Ethernet over two pairs is possible but that limits you to 100 Mbps (if memory is working)
|
The author of the above post is a thinkbroadband staff member. It may not constitute an official statement on behalf of thinkbroadband.
|
|
It could also result in an improved speed, shifting an NTE5 may mean that the external cabling becomes shorter.
|
The author of the above post is a thinkbroadband staff member. It may not constitute an official statement on behalf of thinkbroadband.
|
|
mmm I am around 200m from cab and been give max fttc speed estimates
I have bought some cat5 cable and connectors so I can wire it from outside my house
wondering if is a better solution ?
|
|
Ethernet over two pairs is possible but that limits you to 100 Mbps (if memory is working It is working. 100 Mbit/s Ethernet uses 1/2 and 3/6. Gigabit needs all four pairs.
If Stanman goes through on his idea of running cable externally, he should use external grade cable, otherwise the insulation will be degraded by the ultra violet light.
|
|
Not clear on what you are doing? Rewiring the incoming Openreach line - which is a BIG NO NO or just playing with getting Ethernet around the home.
|
The author of the above post is a thinkbroadband staff member. It may not constitute an official statement on behalf of thinkbroadband.
|