General Discussion
  >> Fibre Broadband


Register (or login) on our website and you will not see this ad.


Pages in this thread: 1 | 2 | [3] | (show all)   Print Thread
Standard User candlerb
(experienced) Tue 14-Jan-20 10:20:05
Print Post

Re: FTTP Install Process


[re: Zarjaz] [link to this post]
 
In reply to a post by Zarjaz:
The poster mentions a four port CBT connectorised block terminal, not a four port ONT dect.


Exactly. I have only a single-port ONT.
Standard User dect
(experienced) Tue 14-Jan-20 12:01:28
Print Post

Re: FTTP Install Process


[re: Zarjaz] [link to this post]
 
In reply to a post by Zarjaz:
The poster mentions a four port CBT connectorised block terminal, not a four port ONT dect.
Sorry
Standard User dect
(experienced) Tue 14-Jan-20 12:10:43
Print Post

Re: FTTP Install Process


[re: candlerb] [link to this post]
 
In reply to a post by candlerb:
In reply to a post by Zarjaz:
The poster mentions a four port CBT connectorised block terminal, not a four port ONT dect.


Exactly. I have only a single-port ONT.
Sorry was confusing you with baby_frogmella.


Register (or login) on our website and you will not see this ad.

Standard User crarcher
(newbie) Tue 14-Jan-20 22:01:10
Print Post

Re: FTTP Install Process


[re: Taras] [link to this post]
 
I ordered on 30th December on KCI2 Assure (UG fed).

Openreach turned up on 31st to check the duct and found it blocked a dig was advised within 7-10 days, Roadworks site was showing as work due yesterday and today which was slightly longer due to New Year. Whilst there is no evidence of a dig, a blue rope has appeared today, so looks like someone has managed to rod the duct with a bit more oomph and cleared whatever the blockage was.

The original live date was for the 17th but that is now showing as 17th Feb for Fibre and 17th Jan for copper. Now crossing fingers they can pull it forward again.
Standard User PaulKirby
(knowledge is power) Tue 14-Jan-20 23:41:13
Print Post

Re: FTTP Install Process


[re: dect] [link to this post]
 
In reply to a post by dect:
Interesting th first line of yours say exactly the same as one of my friends

"Single Dwelling Unit Residential OH Feed with no anticipated issues."

But yours is 'KCI2 assure' and their's is '1 stage' so its not just down to the wording on the DSL checker their must be other factors or an error that has been suggested.

All I can say about our connection is:
  • The external hardware (Splitter, DP and Manifold) were a 2011 install that the system said wasn't there until end of 2016.
  • BT then installed FTTC end of 2017 for the rest of my area, even though FTTP hardware is in place.
  • Ours is using the old Huawei 4 data, 2 phone port ONT.
  • Ours was also the 2 Stage Install done over 2 days instead of a weeks gap (could of been done in the same day).
  • There is no connectorised block terminal (CBT) on our pole.
  • There is a few spare fibres coiled up in our CSP outside and also have several free fibre ports left on our Fibre DP hardware.
That's all that I can say.

Paul

Edited by PaulKirby (Tue 14-Jan-20 23:45:42)

Standard User dect
(experienced) Wed 15-Jan-20 08:58:27
Print Post

Re: FTTP Install Process


[re: PaulKirby] [link to this post]
 
Thank you Paul, very detailed as always smile
Pages in this thread: 1 | 2 | [3] | (show all)   Print Thread

Jump to