In reply to a post by griff_90:

Thanks mate!

Did you find it? Using that link now doesn't have it, and searching for VDSL or VDSL2+ doesn't either.

Hi Steve,

Mine arrived today...has 8.4.1..... the actual router as a "router" is RUBBISH!!! I can't even find where to change the IP address!! could just be me. Or change the MTU of the lan or wan! It also gives me a slightly lower sync than the BT modem (well IP profile..... as that is all i can check! with that modem

Anyway.... I knew from when my lines were installed the attn and snrm... mine shows 0.3u/s attn and its 3 and 0.7d/s and it was 7.0.... but from your stats i would say yours is in the 10's as your upstream is 0.7 (or 7 as a guess) Its looks like a decimal point error? Still if yours is in the 10's dosen't explain the poor sync!

Have you tried doing a line test on BT's website?

Anyway i hope you get to the bottom of it..... i know just how frustrating it can be!! Not made any easier with BT/Openreach not letting you see the stats!

Anyway its served its purpose i found out what is wrong with my IDnet line( I thought is was DLM bumping up my SNRM to 15dB or more.... it has actually lost 10dB of SNRM! so probably a line fault. My BT Infinity line still has its 15-16dB of SNRM at full synch.

What i did notice though is you get a much better upload throughput with this router! nearly a whole Mbps!

But if i can't change the routers IP address it could be going back as i have 2 networks joined via 2 routers on different subnets ....... gives nice speeds on multiple threaded downloads..... Best i have got is 9.1MB/s (you will need 2 nic's with static IP's and defined DNS Servers and also the metric set to the same (i use 1 for both on mine and it kind of load balances in a fashion!)

In reply to a post by Trolltamer:

But if i can't change the routers IP address it could be going back

It's under home network -> interfaces->local network ->configure

Does anyone know if this router here is suitable for FTTC? My connection has been playing up for the last week or so and would like to see some stats to see if I can see where the problem is coming from.

that's what it's for, can't comment if it'll work with the BT service out of the box - find a UK retailer and ask them ? or one with a 14 day return policy perhaps.

Cheers, will see if I can find anyone who has got it in stock first.

http://www.lambda-tek.com/componentshop/index.pl?ori... out of stock due Feb 15th

Cheers!

sync speed on his Fluke (I think it was).

ahem, JDSU or EXFO.

Hi Vdsl_steve,

I was just wondering how easy you found it to setup the device?

There are a few other devices that are available but I'd rather go for one that has been tested. How are you finding it so far?