General Discussion
  >> Fibre Broadband


Register (or login) on our website and you will not see this ad.


Pages in this thread: 1 | 2 | 3 | 4 | [5] | 6 | (show all)   Print Thread
Standard User deleted
(deleted) Sun 20-Feb-11 16:04:28
Print Post

Re: That was painless


[re: jchamier] [link to this post]
 
As far as I remember it has a single GigE and 3 FastE ports.
Standard User RobertoS
(sensei) Sun 20-Feb-11 16:35:30
Print Post

Re: That was painless


[re: deleted] [link to this post]
 
Mine has two Lan ports. Lan2 has a sticky over it saying "Not in use".

My broadband basic info/help site - www.robertos.me.uk
My domains,website and mail hosting - Tsohost. Internet connection - IDNet Home Starter Fibre.
Standard User jchamier
(knowledge is power) Sun 20-Feb-11 16:47:13
Print Post

Re: That was painless


[re: Squirrel] [link to this post]
 
In reply to a post by Squirrel:
What's the difference ?


900mbps smile But if BT is trying to future proof the network and allow in theory for 100mbps services, then a 100mbps port won't be good enough. Also the problem will be finding routers with GigE WAN ports - I think that's one reason why VM supply an all-in-one solution due to the problems of low-spec domestic kit.

I saw a topic in another forum where a gent in a Nordic country has such fast speed (80m symmetric) that all the routers he tries cause massive slowdown. His internet is delivered by fibre to a block and then shared out via copper - so essentially a modified FTTC I guess!!

James - be* pro - on THFB - sync about 17.2mbps - BQM


Register (or login) on our website and you will not see this ad.

Standard User Squirrel
(fountain of knowledge) Sun 20-Feb-11 17:37:16
Print Post

Re: That was painless


[re: jchamier] [link to this post]
 
I have read this somewhere on the web this afternoon but I cannot find it again frown

BT HH 3

1 x 1Gbps WAN
1 x 1Gbps LAN
3 x 100Mbps LAN

VDSL2 Modem

1 x 100Mbps LAN
1 x unused LAN

Moderator billford
(moderator) Sun 20-Feb-11 17:53:05
Print Post

Re: That was painless


[re: Squirrel] [link to this post]
 
In reply to a post by Squirrel:
VDSL2 Modem

1 x 100Mbps LAN
1 x unused LAN
That actually fits with something I found, but it was just a blog-type page so I didn't take it as gospel. Looks like it's only 100Mbps then... which should be OK really.

After all, the modem is basically just converting from set of voltage signals to another (OK, a bit of a simplification tongue) so it should be able to get pretty close to the 100Mbps without trouble.

Whereas a router has rather more work to do... I know a few people have found increased speed on FTTC by switching from a router with a 10/100 WAN port to a gigabit one.

Would that be something to do with the port itself, or the likelihood that a gigabit router would have a faster processor?

~~~~~~~~~~~~
Bill

[email protected] ________________________Planes and Cars and ...________________________BQM
The author of the above post is a thinkbroadband moderator but it does not constitute an official statement on behalf of thinkbroadband.
Standard User jchamier
(knowledge is power) Sun 20-Feb-11 17:57:01
Print Post

Re: That was painless


[re: billford] [link to this post]
 
In reply to a post by billford:
Whereas a router has rather more work to do... I know a few people have found increased speed on FTTC by switching from a router with a 10/100 WAN port to a gigabit one.

Would that be something to do with the port itself, or the likelihood that a gigabit router would have a faster processor?


Could be a bit of both. On busy servers the TCP/IP overhead is overloaded to the network card. Doubt that happens on home routers.

I think with speeds higher than FTTC, ie, the VM 50 and 100 services, we will see some interesting developments in home router performance - but probably at increased costs.

Shame none of these routers yet supply 4 internal GigE ports; makes copying files around LAN much quicker smile

James - be* pro - on THFB - sync about 17.2mbps - BQM
Moderator billford
(moderator) Sun 20-Feb-11 18:07:10
Print Post

Re: That was painless


[re: jchamier] [link to this post]
 
In reply to a post by jchamier:
Shame none of these routers yet supply 4 internal GigE ports; makes copying files around LAN much quicker smile
My Airport Extreme has got three tongue

~~~~~~~~~~~~
Bill

[email protected] ________________________Planes and Cars and ...________________________BQM
The author of the above post is a thinkbroadband moderator but it does not constitute an official statement on behalf of thinkbroadband.
Standard User deleted
(deleted) Sun 20-Feb-11 18:40:15
Print Post

Re: That was painless


[re: jchamier] [link to this post]
 
In reply to a post by jchamier:
The original BT idea of ADSL to a USB plug was generally accepted as insane (USB being a troublesome software interface).

The 512Kb service to USB wasn't quite the "original" ADSL service. Before 512K became available, the service was at 2Mb with BT-supplied Alcatel router/modem boxes. This too was installed by BT techs, and was a similar closed box to today's VDSL2 boxes, with no ability to read any stats. IIRC they too ran pretty hot.

But otherwise, yes, the USB boxes weren't a brilliant idea, were they!
Standard User laser
(newbie) Sun 20-Feb-11 19:46:43
Print Post

Re: That was painless


[re: billford] [link to this post]
 
my wndr3700 has Gigabit WAN & Four Gigabit Ethernet ports + a Broadband usage meter
Standard User jchamier
(knowledge is power) Mon 21-Feb-11 07:57:34
Print Post

Re: That was painless


[re: deleted] [link to this post]
 
In reply to a post by WWWombat:
The 512Kb service to USB wasn't quite the "original" ADSL service. Before 512K became available, the service was at 2Mb with BT-supplied Alcatel router/modem boxes. This too was installed by BT techs, and was a similar closed box to today's VDSL2 boxes, with no ability to read any stats. IIRC they too ran pretty hot.


I recall you could get these Efficient Networks routers with 512k as well but it was only on business plans. This was over £80/month IIRC ?

But otherwise, yes, the USB boxes weren't a brilliant idea, were they!


The problem was that BT (before OR) specified the USB plug was the network termination point, so legally you weren't allowed to change it. Draytek made a cool box that took the USB interface into what we'd expect today as a router - but performance was always low, only worked for 512k smile

James - be* pro - on THFB - sync about 17.2mbps - BQM
Pages in this thread: 1 | 2 | 3 | 4 | [5] | 6 | (show all)   Print Thread

Jump to