Libreoffice is what you need http://www.libreoffice.org/assets/Uploads/EN-Project...

opens fine in office 2010 x64

In reply to a post by BatBoy:

Libreoffice is what you need http://www.libreoffice.org/assets/Uploads/EN-Project...

Opens fine in office 07 for me. Very useful, finally some documentation that confirms my cab is getting FTTC - Nearly all cabs in my area have been upgraded except mine, but looking at that list its no wonder why BT are taking so long - its never ending!

Very interesting indeed...
My postcode is covered by 3 different cabs , and only 1 has a 'Yes' next to it! I assume that this means the other 2 will not be FTTC enabled (will they get FTTP instead...?).

I know where all the cabs are - 1 is in the next street (no), and the other 2 are in different places a few streets away (1 yes, 1 no). I would have thought I'd be on the nearest one (?)

FTTC not due here until 2012 now, so I guess I'll have to wait quite a while to find out.

'Uplift'/improvement of existing cabinets to accommodate the increased amount of cables, duct routes may have to be enlarged or de-silted, etc, etc, etc.








Thicko

so what would

{LCTOT}{p5},0,100,3.18,5a,Yes,FTTC

mean for my postcode? Just curious as the BT wholesale checker was saying FTTC would give me 100kb/s before (due to be upgraded in June/July) and now it isn't saying it's going to be available at all. I currently get 8-10mb on ADSL2 llu.

God knows, I am a thicky also, but I do know what 'uplift' means !

In reply to a post by Player:

so what would

{LCTOT}{p5},0,100,3.18,5a,Yes,FTTC

mean for my postcode? Just curious as the BT wholesale checker was saying FTTC would give me 100kb/s before (due to be upgraded in June/July) and now it isn't saying it's going to be available at all. I currently get 8-10mb on ADSL2 llu.

You are on cab 5
100% of lines on your cab should get FTTC when its enabled (the YES bit means your cab is still on the list to be done)
You could expect a 3.18x increase in your speed.
Your Cab is part of phase 5a of the rollout

Thats how i read mine. And im guessing

I presume, no postcode..no cabinet....no fibre.

In reply to a post by mkel78:

There is one zip file here that contains an excel document of all of the postcode locations of every street cabinet in the UK, it also says which cabinets are going to be FTTC enabled, you can cross reference against your own postcode.

Well not every exchange.Strangely Gloucester and Barnwood do not featue at all. Suppose that means no hope!