Your answer is confusing.

When someone asks to clarify between the master socket, and the test socket, there is a distinction.

The master socket is taken to be the one in the faceplate; the test socket is the one on the backplate, that the faceplate plugs into.

The faceplate itself can cause errors, which is why people ask for results when plugged into the test socket alone. And when they can't be sure what you've done, they ask for clarification - or a retest.

Just to clarifyfor OP, see: Master & Test socket.

Sorry mate, if Ive confused anyone, But I have taken the readings one of a slave socket, which were the first speeds I posted, the 2nd set of speed results were Off the TEST socket, with the faceplate removed !!
very very little difference.
Which is unusual, as I would have expected a lot better results of the TEST socket

Are you on the WNBUC also?

Hi James
I think Rhubarb is on Buckley as well

I notice that the FTTC box has appeared alongside Cabinet 26 on the corner of Bod Offa & Mold Road. According to 'the spreadsheet' my area is served by Cabinets 26 & 8 with a majority of the area being on cabinet 8. I've driven, cycled and walked around the area but cannot find cabinet 8, does anyone know where it is? Rgds.

You asked, I gave!

http://maps.google.co.uk/maps?q=PCP8%20(WNBUC)&hl=en...

Nicely tucked away there!

In reply to a post by Adsl24:

You asked, I gave!....

You Sir, are a star. Thank you!

I must have walked past that box hundreds of times over the years.

Cheers - Andy

No problem at all.

I've been for a walk and there is no FTTC box near Cabinet 8. Cabinet 26 and it's associated FTTC box (looks like a Huawei 128) is only 80 meters away. I wonder if this single FTTC could serve lines from both cabinets?

Edited by Rhubarb (Thu 11-Aug-11 17:58:38)