|
|
No mate its the weekend and beer and a right old knees up were beckoning lol
Come monday when the mist has lifted ill look 
|
|
|
I have unlocked the 'modem', and have the following stats on profile 17a:
| Text | 1
23
45
67
89
1011
1213
1415
1617
1819
2021
22 | # xdslcmd info --pbParams
xdslcmd: ADSL driver and PHY statusStatus: Showtime
Retrain Reason: 0Max: Upstream rate = 9217 Kbps, Downstream rate = 49816 Kbps
Path: 0, Upstream rate = 9113 Kbps, Downstream rate = 39997 Kbps
Discovery Phase (Initial) Band PlanUS: (0,95) (868,1207) (1972,2783)
DS: (32,859) (1216,1963) (2792,3939) Medley Phase (Final) Band Plan
US: (0,95) (868,1207) (1972,2783) DS: (32,859) (1216,1963) (2792,3939)
VDSL Port Details Upstream DownstreamAttainable Net Data Rate: 9217 kbps 49816 kbps
Actual Aggregate Tx Power: 5.8 dBm 11.9 dBm============================================================================
VDSL Band Status U0 U1 U2 U3 D1 D2 D3 Line Attenuation(dB): 5.9 32.4 48.9 N/A 15.2 40.5 63.0
Signal Attenuation(dB): 11.2 31.4 47.9 N/A 15.2 40.5 63.0 SNR Margin(dB): 6.3 6.4 6.3 N/A 10.4 10.4 0.0
TX Power(dBm): -4.1 -12.7 5.3 N/A 9.7 7.8 -15.5 |
While its a wonderful line compared to the ADSLMax one I had, I am disappointed that I will not be able to keep up with the technology's potential WRT upload bandwidth. I don't care much about download bandwidth, its upload thats particularly rare - it would be pretty awesome if you could reallocate some of the bins to upload...
I have changed the graphing script to cope with profile 17a (only <2000 bins are part of 8c, so I upped the scales to 4100), here are my line stats: http://mg.wandborg.se/mgoblin_media/media_entries/4e...
Not sure what to make of it, other than the bins for the 3rd 'bandwidth' are almost completely unused (perhaps thats the 'U3' band in the text stats?).
|
|
|
I have changed the graphing script to cope with profile 17a (only <2000 bins are part of 8c, so I upped the scales to 4100)
Not sure what to make of it, other than the bins for the 3rd 'bandwidth' are almost completely unused (perhaps thats the 'U3' band in the text stats?).
& here are mine:-
Line Stats 20/11/2011
& also SNRM etc.
I have been messing with Windows batch files (not quite ready for release yet), but I believe the updated Linux script is about to be released in the usual location.
Paul.
|
|
Register (or login) on our website and you will not see this ad.
|
|
|
|
Hi! Is that stats are good ? It is possible to get 100Mb in future?
# xdslcmd info --show
xdslcmd: ADSL driver and PHY status
Status: Showtime
Retrain Reason: 0
Max: Upstream rate = 37753 Kbps, Downstream rate = 108292 Kbps
Path: 0, Upstream rate = 10000 Kbps, Downstream rate = 39999 Kbps
Link Power State: L0
Mode: VDSL2 Annex B
VDSL2 Profile: Profile 17a
TPS-TC: PTM Mode
Trellis: U:ON /D:ON
Line Status: No Defect
Training Status: Showtime
Down Up
SNR (dB): 26.0 24.9
Attn(dB): 0.0 0.0
Pwr(dBm): 12.8 -2.5
|
|
|
Why All dns adn gateway are different> It's BT VPN ?
Connection Name IP Address Subnet Mask Default Gateway
ptm1.101
ptm1.301 10.107.176.252 255.255.254.0 10.107.176.1
DNS Information
Help
Connection Name Primary DNS Secondary DNS
ptm1.101
ptm1.301 10.160.170.232 10.160.170.231
Edited by deleted (Sun 20-Nov-11 19:42:19)
|
|
|
The best I have seen, I didn't think 17a went over 100mbit mark?
BT Infinity
ROUTER:-Netgear WNDR37AV
JDSU Stats
Sync 39999D 9995U
Attenuation: 9.6 SNR: 11.4
Line Length 300meters
|
|
|
I change front place on adsl nation I don't use the phone so I don't need any telephone filters.I'ts look like big improvement 
|
|
|
I very much changing filters or have no filters would make much difference, you are close to the cab and I would say a sub 100meter line.
BT Infinity
ROUTER:-Netgear WNDR37AV
JDSU Stats
Sync 39999D 9995U
Attenuation: 9.6 SNR: 11.4
Line Length 300meters
|
|
|
As i said i was in a rush, i just used the modems web interface. Ah . . . Have you now been able to look?
To my eternal shame i cant get putty to do owt, i log in to the router then i can get no further.
|
|
|
To my eternal shame i cant get putty to do owt, i log in to the router then i can get no further. Once logged in with user name admin and password admin, you should see a ATP> prompt.
Obtain a busy-box shell, by typing sh and press the Enter key. You should now see a # prompt. At that shell prompt, you will be able to enter the various xdslcmd commands. Start with xdslcmd --help.
When done, exit the busy-box shell with a Ctrl-D or exit. Then exit from ATP> back to PuTTY.
-----------------------------------------------------
100% Linux and, previously, Unix.
|
Pages in this thread: 
Print Thread
Alnath
