Hacked HG612

Morning all

just to check Im not doing something wrong , am I right in thinking that once it's hacked and the new firmware is being used you still need to do the modify your ip on the adapter and connect directly to LAN 2 to get the stats ?

Thanks

Yes, unless you turn on the DHCP in the (now) router.

Thank you !

on a side note , is this to small to be my FTTC Cab ?

http://maps.google.co.uk/maps?q=al3+4ay&hl=en&ll=51....

That's not an FTTC cab.

Yes, it's too old as well.

Thought as much , wonder where mine is then !!

In reply to a post by KayCee:

just to check Im not doing something wrong , am I right in thinking that once it's hacked and the new firmware is being used you still need to do the modify your ip on the adapter and connect directly to LAN 2 to get the stats ?

If you are using a router, an ethernet cable can be run from a spare router LAN port to the modem's LAN2 port, along with the usual ethernet cable from the router's WAN port to the modem's LAN1 port.

You would then have normal internet access via the modem's LAN1 port & also access via the router to the modem's stats.

That saves having to keep swapping cables from the modem's LAN1 & LAN2 ports.

Ahh cool , Im using a switch with a spare port , so will give that a go !