Then you are aware it's called TR069_INTERNET and it hands out routeable IP addresses from DHCP?

I wall take your sage advice.

Wall?

The Fritz!Box 7390 is an excellent modem/router for VDSL2. I am using it at the moment, though I'm having quality issues with the VOIP/telephone side of it, the DSL and networking side make up for that.

I can now alter my SNRM target rather than be stuck with what BT's DLM thinks is best (6 dB for example), and adjust some other parameters (still experimenting so I can't specifically say what does or doesn't work in that area, but I can confirm that DS SNRM target offset works fine!).

ARe you still using Annex A?

Please can you post full modem stats for examination as to what else looks different? I'm particularly interested in the Annex, and things like:-

VDSL2 framing
                        Path 0
B:              239             237
M:              1               1
T:              64              62
R:              0               16
S:              0.1349          0.5278
L:              14234           3850
D:              1               1
I:              240             127
N:              240             254

                        Counters
                        Path 0
INP:            0.00            0.00
PER:            2.15            8.18
delay:          0.00            0.00
OR:             88.96           31.29

Bitswap:        27495           15736

# xdslcmd info --pbParams
xdslcmd: ADSL driver and PHY status
Status: Showtime
Retrain Reason: 0
Max:    Upstream rate = 14365 Kbps, Downstream rate = 57492 Kbps
Path:   0, Upstream rate = 14343 Kbps, Downstream rate = 56626 Kbps

Discovery Phase (Initial) Band Plan
US: (0,95) (868,1207) (1972,2783)
DS: (32,859) (1216,1963) (2792,3959)
Medley Phase (Final) Band Plan
US: (0,95) (868,1207) (1972,2783)
DS: (32,859) (1216,1963) (2792,3959)
       VDSL Port Details       Upstream        Downstream
Attainable Net Data Rate:      14365 kbps         57492 kbps
Actual Aggregate Tx Power:        6.8 dBm          13.3 dBm
============================================================================
  VDSL Band Status        U0      U1      U2      U3      D1      D2      D3
  Line Attenuation(dB):  5.3     29.9    45.0     N/A    14.5    36.9    57.3
Signal Attenuation(dB):  8.3     29.0    43.8     N/A    14.5    36.9    57.3
        SNR Margin(dB):  6.1     6.2     6.2      N/A    6.3     6.3     6.3
         TX Power(dBm): -3.8    -12.5    6.3      N/A    11.0    7.8     3.5

VDSL2 profiles:
        8a      Enabled
        8b      Enabled
        8c      Enabled
        8d      Enabled
        12a     Enabled
        12b     Enabled
        17a     Enabled
        30a     Enabled
        US0     Enabled
Phone line pair:
        Inner pair
Capability:
        bitswap         On
        sra             Off
        trellis         On
        sesdrop         Off
        CoMinMgn        Off
        24k             On
        phyReXmt(Us/Ds) Off/On
        TpsTc           AvPvAa
        monitorTone:    On
        dynamicD:       On
        dynamicF:       On
        SOS:            On
        Training Margin(Q4 in dB):      100
#

In reply to a post by Ixel:

I can now alter my SNRM target rather than be stuck with what BT's DLM thinks is best (6 dB for example), and adjust some other parameters (still experimenting so I can't specifically say what does or doesn't work in that area, but I can confirm that DS SNRM target offset works fine!).

I see from your thread in the other forum that you have managed to increase SNRM to induce increased stability.

Have you experimented with lowering it to below 6dB (say to 3 dB) in order to increase sync speeds?

I tried that with the HG612, but it seemed stuck at slightly over 6dB, determined by DLM.

In reply to a post by kasg:

It is a router that will work with a VDSL service. It still needs a modem! You won't get a combined router and VDSL modem for anywhere near that price. And as per post above, you can disable VLAN 301 if it bothers you.

If you mean the BiPAC 8200N, as in Anonymous's link, then you are mistaken.

It is a VDSL2 modem/router and I am currently using one and it makes a reasonable one box solution although it has a few speed issues with ECI DSLAM's which is being looked at by Billion's support engineers.

In reply to a post by simon194:

If you mean the BiPAC 8200N, as in Anonymous's link, then you are mistaken.

No, I was quite specifically referring to the original query about the TP-Link router.

In reply to a post by simon194:

If you mean the BiPAC 8200N, as in Anonymous's link, then you are mistaken.

If you click the links in the post headers you will find he is referring to the opening post.

In reply to a post by Ixel:

The Fritz!Box 7390 is an excellent modem/router for VDSL2. I am using it at the moment..

I can now alter my SNRM target rather than be stuck with what BT's DLM thinks is best (6 dB for example)..but I can confirm that DS SNRM target offset works fine!).

It would be great to see some screen shots of this.

cheers, a