General Discussion
  >> Fibre Broadband


Register (or login) on our website and you will not see this ad.


Pages in this thread: 1 | [2] | (show all)   Print Thread
Standard User RobertoS
(sensei) Fri 04-Jan-13 19:17:43
Print Post

Re: Question On SNR


[re: StephenTodd] [link to this post]
 
Standard, Stable, Super-stable.

My broadband basic info/help site - www.robertos.me.uk | Domains,website and mail hosting - Tsohost.
Connection - Plusnet Extra Fibre (FTTC). Sync ~ 54.0/14.9Mbps @ 600m. - BQM

"Where talent is a dwarf, self-esteem is a giant." - Jean-Antoine Petit-Senn.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Allergy information: This post was manufactured in an environment where nuts are present. It may include traces of understatement, litotes and humour.
Standard User ukhardy07
(fountain of knowledge) Fri 04-Jan-13 22:32:02
Print Post

Re: Question On SNR


[re: RobertoS] [link to this post]
 
I bet Sky use superstable as the DLM is much more sensitive than my BT infinity (or at least it appears that way)
Standard User RobertoS
(sensei) Fri 04-Jan-13 22:45:46
Print Post

Re: Question On SNR


[re: ukhardy07] [link to this post]
 
I get the impression no GEA user modifies the OR setting from Standard.

If Sky do, stable sounds more likely, based on their LLU setup. On the WBC ADSLx DLM the three seem to correspond to 6, 9 and 12?/15?, so there is a possibility the OR ones are similar.

My broadband basic info/help site - www.robertos.me.uk | Domains,website and mail hosting - Tsohost.
Connection - Plusnet Extra Fibre (FTTC). Sync ~ 54.0/14.9Mbps @ 600m. - BQM

"Where talent is a dwarf, self-esteem is a giant." - Jean-Antoine Petit-Senn.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Allergy information: This post was manufactured in an environment where nuts are present. It may include traces of understatement, litotes and humour.


Register (or login) on our website and you will not see this ad.

Standard User simon194
(committed) Sat 05-Jan-13 00:20:25
Print Post

Re: Question On SNR


[re: RobertoS] [link to this post]
 
In reply to a post by RobertoS:
I get the impression no GEA user modifies the OR setting from Standard.

If Sky do, stable sounds more likely, based on their LLU setup. On the WBC ADSLx DLM the three seem to correspond to 6, 9 and 12?/15?, so there is a possibility the OR ones are similar.

I'm with Sky and the SNR is around 6dB.
Standard User RobertoS
(sensei) Sat 05-Jan-13 00:35:42
Print Post

Re: Question On SNR


[re: simon194] [link to this post]
 
And that is Standard smile.

My broadband basic info/help site - www.robertos.me.uk | Domains,website and mail hosting - Tsohost.
Connection - Plusnet Extra Fibre (FTTC). Sync ~ 54.0/14.9Mbps @ 600m. - BQM

"Where talent is a dwarf, self-esteem is a giant." - Jean-Antoine Petit-Senn.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Allergy information: This post was manufactured in an environment where nuts are present. It may include traces of understatement, litotes and humour.
Standard User Chrysalis
(eat-sleep-adslguide) Sat 05-Jan-13 00:51:09
Print Post

Re: Question On SNR


[re: RobertoS] [link to this post]
 
all the profiles start at 6db but its the trigger points that change, eg. stable has a lower error threshold than standard.

BT Infinity 2 Since Dec 2012 - Estimate 65.9/20 - Attainable peak 110/36 - Current Sync 71/20
Standard User RobertoS
(sensei) Sat 05-Jan-13 10:40:25
Print Post

Re: Question On SNR


[re: Chrysalis] [link to this post]
 
Source link please?

My broadband basic info/help site - www.robertos.me.uk | Domains,website and mail hosting - Tsohost.
Connection - Plusnet Extra Fibre (FTTC). Sync ~ 54.0/14.9Mbps @ 600m. - BQM

"Where talent is a dwarf, self-esteem is a giant." - Jean-Antoine Petit-Senn.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Allergy information: This post was manufactured in an environment where nuts are present. It may include traces of understatement, litotes and humour.
Pages in this thread: 1 | [2] | (show all)   Print Thread

Jump to