haha yea sorry

You can edit it for up to 12 hours from posting .

Sorry I can't help with info though.

[email protected]

Send a email to that address, add your phone number and address and they should get back to you within 7-10 days, its the most accurate information you can get.

You could also try the Superfast Cornwall team, as they should be able to give you some information.

Thanks CCXO
i need to speak to openreach about the location of my master socket and why did they put it in the communal stairwell of our block of flats lol thanks again.

BT have installed cabinet 31 on the outside wall of the exchange.
Only one of our lines has moved to it so far.
16.5 meg down and 1.2 meg up on adsl2+ to 27 meg down and 5.6 meg up on fibre.
And its cheaper for unlimited fibre than what we were paying for adsl2+

TR13 8YE was directly connected to BT exchange but, out of the blue, FTTC arrived some months ago and speeds are now constantly 75/20. Engineer took all of 10 minutes to connect me and didn't even have time for a cuppa.The cab is on Church Hill somewhere and must be pretty close with my speeds but darned if I can find it.

The new PCP and fibre cab are probably in the exchange grounds.

In reply to a post by desouzr:

The new PCP and fibre cab are probably in the exchange grounds.

That's about 3/4 mile away.Probably right and the fibre has been blown through. Engineer stated that the cab is on Church Hill which is around 100 mtrs away.

In reply to a post by sobranie:

In reply to a post by desouzr:

The new PCP and fibre cab are probably in the exchange grounds.

That's about 3/4 mile away.Probably right and the fibre has been blown through. Engineer stated that the cab is on Church Hill which is around 100 mtrs away.

If it is FTTC the fibre stops at the cabinet. It's the old copper from the "new" PCP that brings the VDSL2 to you.

Probably this one