In reply to a post by StephenTodd:

Some people find it helps to fix the channel rather than using the HomeHub auto channel selection.

This helped me out no end when I had problems with an unrelated router/device - so it can make all the difference. I think in my case, it was the fault of my phone - after getting really fed up, I eventually trawled through a big PDF of my phone manufacturer's instructions, and luckily picked up on a sentence which said "preferably channel 11" - since I told my D-Link 2640R to do that as opposed to use the auto setting, I've had a perfect wi-fi connection.

There are apps to analyse wi-fi around you which might be "crowding" or... you know, interfering in some obscure way with your link - maybe if the above fails then download one and see where the other strong signals lie around you in the spectrum. Someone will be able to recommend one for your laptop, I've only got one on my Android phone (this one).

Edited by deleted (Sun 03-Feb-13 14:38:17)

The app I use to monitor wireless is inSSIDer; free on PCs. Helpful to choose a good channel, and also to check if small changes to position/orientation of router or device can improve your signal. I think there is a paid for version of inSSIDer on Mac, and also a free one called iStumbler.

apparently they should be 100mb/s but on my hh3 are only 10mb/s

How are you proving that ? I have never come across that issue before ?

In reply to a post by StephenTodd:

The app I use to monitor wireless is inSSIDer; free on PCs. Helpful to choose a good channel, and also to check if small changes to position/orientation of router or device can improve your signal. I think there is a paid for version of inSSIDer on Mac, and also a free one called iStumbler.

thanks, I already used inssider.

In reply to a post by Zarjaz:

apparently they should be 100mb/s but on my hh3 are only 10mb/s

How are you proving that ? I have never come across that issue before ?

there's a topic on bt forums about this apparently it was fixed with a fw update but not in my case. Anyway, I replaced a hdd in my laptop, reinstalled windows etc. Plugged the cable in (turned of wifi) and it was downloading stuff at 1mb/s (so 10mb) only. I have then unplugged the cable and turned wifi on, the speed went right up to 5-6mb/s (50-60mb)

edit: also when I stream stuff from my pc to my tv (both connected via cable to the router) and try to fast forward (usually 10 secs per button press) it gets stuck and says preparing to play. Never had this issue with the old router (DSL ) and didn't have this issue with the asus either again using the same cables

Edited by deleted (Sun 03-Feb-13 16:36:02)

I'm beginning to get confused as you are using lower case m and b all the time. As in "it was downloading stuff at 1mb/s (so 10mb)".

I assume all the "m"s (milli) are really M (Mega), but your "b"s I'm sure are varying between "b" (bits) and "B" (Bytes). Seeing as a Byte is 8 bits, and we are discussing speed issues, this becomes rather important.

For instance, if you are seeing 10MB per second out of an ethernet port, that is 80Mbps. Which is fair enough.

Hi there,

If you need a hand sorting this out just drop me in an email and I'll be happy to help if the tips on this thread don't do the trick.

You can contact me via this link: http://bt.custhelp.com/app/contact_email/c/4950

Cheers

Craig

In reply to a post by cinek:

yeah ;/ apparently they should be 100mb/s but on my hh3 are only 10mb/s

Remember that nowadays the actual speed of TP ethernet is a negotiated affair - so it needs both ends to have the capable hardware *and* agree to use, say, 100Mbps full duplex.

Have you checked that the settings on your PC aren't restricting it to 10Mbps?

For a while, my whizzy desktop (Windows 7, with a gigabit port on the motherboard) would auto-negotiate at 10Mbps with the switch (a gigabit Netgear). Quite an annoying drop, and I never got to the bottom of *why*. It just stopped doing it.