=~=~=~=~=~=~=~=~=~=~=~= Plink log 2013.07.17 17:41:07 =~=~=~=~=~=~=~=~=~=~=~=

xdslcmd info --stats

xdslcmd: ADSL driver and PHY status

Status: Showtime

Retrain Reason: 2

Max: Upstream rate = 7718 Kbps, Downstream rate = 27568 Kbps

Path: 0, Upstream rate = 8087 Kbps, Downstream rate = 20782 Kbps



Link Power State: L0

Mode: VDSL2 Annex B

VDSL2 Profile: Profile 17a

TPS-TC: PTM Mode

Trellis: U:ON /D:ON

Line Status: No Defect

Training Status: Showtime

Down Up

SNR (dB): 8.9 5.0

Attn(dB): 0.0 0.0

Pwr(dBm): 11.2 6.4

VDSL2 framing

Path 0

B: 63 238

M: 1 1

T: 54 22

R: 16 16

S: 0.0979 0.9397

L: 6535 2171

D: 329 1

I: 80 255

N: 80 255

Counters

Path 0

OHF: 75714708 1049694

OHFErr: 398 274

RS: 3675847794 3228588

RSCorr: 244825351 4900

RSUnCorr: 15465 0



Path 0

HEC: 3480 0

OCD: 0 0

LCD: 0 0

Total Cells: 3440889649 0

Data Cells: 3551494686 0

Drop Cells: 0

Bit Errors: 0 0



ES: 640 242

SES: 534 6

UAS: 70 70

AS: 301488



Path 0

INP: 3.00 0.00

PER: 3.96 15.50

delay: 8.00 0.00

OR: 48.40 20.12



Bitswap: 138135 143



Total time = 1 days 19 hours 52 min 32 sec

FEC: 352285304 6412

CRC: 116005 419

ES: 640 242

SES: 534 6

UAS: 70 70

LOS: 340 0

LOF: 15 0

Latest 15 minutes time = 7 min 32 sec

FEC: 25 1

CRC: 0 1

ES: 0 1

SES: 0 0

UAS: 0 0

LOS: 0 0

LOF: 0 0

Previous 15 minutes time = 15 min 0 sec

FEC: 594 0

CRC: 3 0

ES: 1 0

SES: 0 0

UAS: 0 0

LOS: 0 0

LOF: 0 0

Latest 1 day time = 19 hours 52 min 32 sec

FEC: 93792 4614

CRC: 8 165

ES: 3 57

SES: 0 5

UAS: 0 0

LOS: 0 0

LOF: 0 0

Previous 1 day time = 24 hours 0 sec

FEC: 1650239 37

CRC: 11 7

ES: 4 8

SES: 0 0

UAS: 0 0

LOS: 0 0

LOF: 0 0

Since Link time = 3 days 11 hours 44 min 47 sec

FEC: 244825351 4900

CRC: 398 274

ES: 25 148

SES: 3 5

UAS: 0 0

LOS: 0 0

LOF: 0 0

xdslcmd info --pbParams
xdslcmd: ADSL driver and PHY status
Status: Showtime
Retrain Reason: 2
Max: Upstream rate = 7718 Kbps, Downstream rate = 27568 Kbps
Path: 0, Upstream rate = 8087 Kbps, Downstream rate = 20782 Kbps

Discovery Phase (Initial) Band Plan
US: (0,95) (880,1195) (1984,2771)
DS: (32,859) (1216,1959) (2792,4083)
Medley Phase (Final) Band Plan
US: (0,95) (880,1195)
DS: (32,859) (1216,1959)
VDSL Port Details Upstream Downstream
Attainable Net Data Rate: 7718 kbps 27568 kbps
Actual Aggregate Tx Power: 6.4 dBm 11.2 dBm
============================================================================
VDSL Band Status U0 U1 U2 U3 D1 D2 D3
Line Attenuation(dB): 5.1 50.0 66.8 N/A 21.6 61.8 0.1
Signal Attenuation(dB): 5.1 49.8 N/A N/A 21.6 61.8 N/A
SNR Margin(dB): 5.4 5.0 N/A N/A 8.9 8.4 N/A
TX Power(dBm): -3.6 6.0 N/A N/A 10.7 1.1 N/A

xdslcmd info --Bits
xdslcmd: ADSL driver and PHY status
Status: Showtime
Retrain Reason: 2
Max: Upstream rate = 7718 Kbps, Downstream rate = 27568 Kbps
Path: 0, Upstream rate = 8087 Kbps, Downstream rate = 20782 Kbps

EDIT: I misread the stats. I read it like I would read an ADSL2+ stats without even considering I was reading fibre stats so I took the 1st two SNRs and stopped reading... My mistake!

I'd get Sky to send somebody out if possible.

Edited by ukhardy07 (Thu 18-Jul-13 16:57:56)

I think this tells the story

Discovery Phase (Initial) Band Plan
US: (0,95) (880,1195) (1984,2771)
DS: (32,859) (1216,1959) (2792,4083)
Medley Phase (Final) Band Plan
US: (0,95) (880,1195)
DS: (32,859) (1216,1959)
VDSL Port Details Upstream Downstream
Attainable Net Data Rate: 7718 kbps 27568 kbps
Actual Aggregate Tx Power: 6.4 dBm 11.2 dBm
============================================================================
VDSL Band Status U0 U1 U2 U3 D1 D2 D3
Line Attenuation(dB): 5.1 50.0 66.8 N/A 21.6 61.8 0.1
Signal Attenuation(dB): 5.1 49.8 N/A N/A 21.6 61.8 N/A
SNR Margin(dB): 5.4 5.0 N/A N/A 8.9 8.4 N/A

The SNR is 8.9
Only 2 bands have been selected as the attenuation is so high.
There may be a line fault, or aluminium wiring.

What was the estimated speed at sign up? Just out of interest. You may have already put this somewhere as I've honestly been dipping in and out of this. If so sorry to make you repeat. It just helps to judge whether there's a line fault a little better.

Edited by ukhardy07 (Thu 18-Jul-13 17:00:20)

Had a fibre SFI.

Openreach rocked up I told him Kelly Comms did my install and immediately he changed the faceplate and the Openreach modem.

I know have the ECI model.

Anyways no errors on the line this tested fine. He did a DLM reset and got my 30Mbit back. Engineer even tidy'd up their cabling which comes through the stairs.

His conclusion dodgy Openreach modem.

Been rock solid since. Touch wood!!!!!!