Register (or login) on our website and you will not see this ad.
|
|
@RobertoS here are the stats info..
| Text | 1
23
45
67
89
1011
1213
1415
1617
1819
2021
2223
2425
2627
2829
3031
3233
3435
3637
3839
4041
4243
4445
4647
4849
5051
5253
5455
5657
5859
6061
6263
6465
6667
6869
7071
7273
7475
7677
7879
8081
8283
8485
8687
8889
9091
9293
9495
9697
9899
100101
102103
104105
106107
108 | # xdslcmd info --stats
xdslcmd: ADSL driver and PHY statusStatus: Showtime
Retrain Reason: 0Max: Upstream rate = 29327 Kbps, Downstream rate = 70484 Kbps
Path: 0, Upstream rate = 20000 Kbps, Downstream rate = 70281 Kbps
Link Power State: L0Mode: VDSL2 Annex B
VDSL2 Profile: Profile 17aTPS-TC: PTM Mode
Trellis: U:ON /D:ONLine Status: No Defect
Training Status: Showtime Down Up
SNR (dB): 6.1 12.2Attn(dB): 0.0 0.0
Pwr(dBm): 12.8 6.3 VDSL2 framing
Path 0B: 239 236
M: 1 1T: 21 5
R: 0 16S: 0.1087 0.3771
L: 17667 5410D: 1 1
I: 240 255N: 240 255
Counters Path 0
OHF: 46411328 2054630OHFErr: 2784 13
RS: 0 3495099RSCorr: 0 91
RSUnCorr: 0 0
Path 0HEC: 5148 0
OCD: 0 0LCD: 0 0
Total Cells: 2184073708 0Data Cells: 211605101 0
Drop Cells: 0Bit Errors: 0 0
ES: 718 12
SES: 5 0UAS: 48 48
AS: 79694
Path 0INP: 0.00 0.00
PER: 1.71 6.12delay: 0.00 0.00
OR: 112.17 203.67
Bitswap: 14844 9
Total time = 22 hours 12 min 20 secFEC: 0 0
CRC: 2785 0ES: 718 12
SES: 5 0UAS: 48 48
LOS: 0 0LOF: 0 0
Latest 15 minutes time = 12 min 20 secFEC: 0 0
CRC: 208 0ES: 9 0
SES: 0 0UAS: 0 0
LOS: 0 0LOF: 0 0
Previous 15 minutes time = 15 min 0 secFEC: 0 0
CRC: 14 0ES: 9 1
SES: 0 0UAS: 0 0
LOS: 0 0LOF: 0 0
Latest 1 day time = 22 hours 12 min 20 secFEC: 0 0
CRC: 2785 0ES: 718 12
SES: 5 0UAS: 48 48
LOS: 0 0LOF: 0 0
Previous 1 day time = 0 secFEC: 0 0
CRC: 0 0ES: 0 0
SES: 0 0UAS: 0 0
LOS: 0 0LOF: 0 0
Since Link time = 22 hours 8 min 13 secFEC: 0 91
CRC: 2784 13ES: 717 12
SES: 5 0UAS: 0 0
LOS: 0 0LOF: 0 0
# |
| Text | 1
23
45
67
89
1011
1213
1415
1617
1819
2021
2223
| # xdslcmd info --pbParams
xdslcmd: ADSL driver and PHY statusStatus: Showtime
Retrain Reason: 0Max: Upstream rate = 29341 Kbps, Downstream rate = 70484 Kbps
Path: 0, Upstream rate = 20000 Kbps, Downstream rate = 70281 Kbps
Discovery Phase (Initial) Band PlanUS: (0,95) (880,1195) (1984,2771)
DS: (32,859) (1216,1959) (2792,4083) Medley Phase (Final) Band Plan
US: (0,95) (880,1195) (1984,2771) DS: (32,859) (1216,1959) (2792,4083)
VDSL Port Details Upstream DownstreamAttainable Net Data Rate: 29341 kbps 70484 kbps
Actual Aggregate Tx Power: 6.3 dBm 12.8 dBm============================================================================
VDSL Band Status U0 U1 U2 U3 D1 D2 D3 Line Attenuation(dB): 2.6 22.3 37.9 N/A 14.4 33.0 51.0
Signal Attenuation(dB): 2.6 22.2 37.8 N/A 14.4 33.0 51.0 SNR Margin(dB): 9.9 11.8 12.4 N/A 5.9 6.1 6.2
TX Power(dBm): -4.7 -16.3 5.8 N/A 9.9 7.3 6.1 # |
Edited by majika2007 (Wed 07-Aug-13 22:15:38)
|
|
|
Excellent connection speed  .
I can't help you myself on working out the cabinet kit from that, but the pbParams are there now and the guys who know their stuff on this won't have to ask you for them and then wait. I think it's the band plans that are different.
My broadband basic info/help site - www.robertos.me.uk | Domains,website and mail hosting - Tsohost.
Connection - Plusnet UnLim Fibre (FTTC). Sync ~ 51.8/16.8Mbps @ 600m. - BQM
"Where talent is a dwarf, self-esteem is a giant." - Jean-Antoine Petit-Senn.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Allergy information: This post was manufactured in an environment where nuts are present. It may include traces of understatement, litotes and humour.
|
|
|
Yeah, I have been spending some time reading over some info on kitz about the xdslcmd for trying to work out what some of these results mean. If I am comparing my stat's results with the stats of the person who compiled the information mine look pretty good from my very limited knowledge.
Anyway, I am chipping away at this *Unlocked* HG612 box and I have to say I am thoroughly enjoying myself; I know, it sounds pretty sad, lol..
One thing I have managed to figure out are the meanings of the following:
B: Number of bytes in Mux Data Frame.
M: Number of Mux Data Frames in FEC Data Frame.
T: Mux Data Frames over sync bytes.
R: Number of check bytes in FEC Data Frame.
S: Ratio of FEC over PMD Data Frame length.
L: Number of bits in PMD Data Frame.
D; Interleave depth (1=fast path).
...
I have also noticed that my max upstream can reach 29324 Kbps, however, its capped to 20000 Kbps. Out of that capped upstream rate its only actually hitting 88.2% / 17640 kbps (approx).
Could this be something which can be altered/lifted/increased to reach somewhere closer to the actual max attainable upload rate? something close to the 30Mbps mark (88.2% of 29324 Kbps = 25864 kbps) ??
|
|
Register (or login) on our website and you will not see this ad.
|
|
|
Also I have noticed that since I installed the HG612 from the ECI modem I have had a slight drop in downstream rates of about 4-5Mbps from the 68Mbps mark down to the 64Mbps mark although my upstream has also dropped slightly but not by as much.. could I have triggered DLM in the process of the swapping/configuration of the HG612. I did do one soft disconnect from Router and one hard rest on the modem (HG612) during the install process..
Will my original speeds return, unsure exactly how DLM works or how it is applied on VDSL2/FTTC connections.
Any thoughts?
|
|
|
I think it is quite common for the sync speed to change when you swap modems. In either direction. It isn't DLM getting upset.
Again, the guys who know the band plans will analyse what yours are like. There are four or five of them around, several in every day.
My broadband basic info/help site - www.robertos.me.uk | Domains,website and mail hosting - Tsohost.
Connection - Plusnet UnLim Fibre (FTTC). Sync ~ 51.8/16.8Mbps @ 600m. - BQM
"Where talent is a dwarf, self-esteem is a giant." - Jean-Antoine Petit-Senn.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Allergy information: This post was manufactured in an environment where nuts are present. It may include traces of understatement, litotes and humour.
|
|
|
hi RobertoS, yes I'm sure someone will get back to me on about my band plan stats in the morning..
Any Advise on how to mimic the Interface groups from the Plusnet TG582n router settings and map it over onto the HG612..
I have broken my BQM and I can't seem to find much info on how to configure the HG612 to have my own interface groups and subnets just like in the Plusnet Router.
IP Addresses
10.0.0.138/24 (static)
192.168.1.254/24 (Static)
192.168.1.252 (Content Sharing)
DHCP Pools________ Address Range __________ Gateway
LAN_private 192.168.1.65 - 192.168.1.252 --- 192.168.0.1 <- HG612 modem
LAN_VIRT 192.168.1.253 - 192.168.1.253 ---- 192.168.1.245 <- TG582n Router
What would happen if I enabled the TR069 on the HG612 and then I can turn it back off again?
Would this update the HG612 with the original plusnet settings which were on the Technicolor TG582n Router
|
|
|
|
Yep.
This confirms it's an ECI DSLAM:-
Discovery Phase (Initial) Band Plan
US: (0,95) (880,1195) (1984,2771)
DS: (32,859) (1216,1959) (2792,4083)
This is the band plan for a Huawei DSLAM:-
Discovery Phase (Initial) Band Plan
US: (0,95) (868,1207) (1972,2783)
DS: (32,859) (1216,1963) (2792,3959)
|
|
|
Cherers for that Bald_Eagle1..
So, the obvious question would be should I put the ECI modem back to get better speeds and attempt to unlock that one instead?
Also, will the HG612 modem be more/less stable on this DSLAM.
BTW, is anyone working on a softmod to unlock the ECI kind of like the HG612 firmware update route? I have read the guides for the ECI and requires certain components/soildering. just wondering if anyway to do it via firware update..
Thanks !
|
|
|
|
The ECI is apparently much harder to unlock & logging/graphing software isn't yet as comprehensively developed as for the HG612.
We believe the HG612 can be a shade more reactive to errors, causing DLM to apply interleaving & thus lowering Sync speed sooner than an ECI would, but the ease of monitoring generally outweighs any perceived slight performance hit.
Some users actually report improved performance when connecting a HG612 to an ECI DSLAM.
So, on balance, there probably isn't much to choose between them.
From what I have read the only way to unlock the ECI is & will remain to be the hardware route.
|
|
|
Thanks for your feedback Bald_eagle1,
On a side note, the stats I provided above are you able to determine the following questions for me please:
- How meters away is the cabinet from my home (approx)
- Do you think there is any room for improvement by the ISP to be able to increase or boost my line speeds at all, like move me over onto the 120/20Mbps packages?
- Will I be able to get 30a profile (vectoring) if/when it becomes available and if so will I see any improvements on line speeds.
- Can you make any conclusions regarding my line quality/Signal performance (am my stats showing signs of/or experiencing any cross-talk)
Thanks
EDIT:
Do you know where I can find info on how to properly configure the HG612 settings like the official WBC FTTC platform service settings, the settings which BT use to configure their network/customer VDSL2 connections ?
Edited by majika2007 (Thu 08-Aug-13 14:26:02)
|
|
|
Pages in this thread: 
Print Thread
majika2007
