General Discussion
  >> Fibre Broadband


Register (or login) on our website and you will not see this ad.


Pages in this thread: 1 | 2 | 3 | [4] | (show all)   Print Thread
Standard User burakkucat
(experienced) Sat 23-Nov-13 16:04:08
Print Post

Re: How common are PPP disconnections with VDSL2?


[re: RobertoS] [link to this post]
 
In reply to a post by RobertoS:
SIN 498 specification for non-Openreach modems:-

"R.VDSL2.9 The modem shall support seamless rate adaptation (SRA) as defined in Section 13.1 of G.993.2 [3]."

So it seems Openreach are looking into it.
The current firmware for the Huawei HG612 (remotely updated in October 2013) has SRA configured "on". This is a new development, as the previous firmware version had it set "off".

Edit: I see Chrysalis has already mentioned this. To answer your follow-on question Bob, that configuration parameter can be seen when the firmware image is examined and contrasted with the previous version of the image.

100% Linux and, previously, Unix.

Edited by burakkucat (Sat 23-Nov-13 16:08:38)

Standard User RobertoS
(sensei) Sat 23-Nov-13 17:33:15
Print Post

Re: How common are PPP disconnections with VDSL2?


[re: burakkucat] [link to this post]
 
Thanks. I just couldn't see it from what we usually telnet. I've now found:-

# xdslcmd profile --show

Modulations:
        G.Dmt   Enabled
        G.lite  Enabled
        T1.413  Enabled
        ADSL2   Enabled
        AnnexL  Enabled
        ADSL2+  Enabled
        AnnexM  Disabled
        VDSL2   Enabled
Phone line pair:
        Inner pair
Capability:
        bitswap         On
        sra             On
        trellis         On
        sesdrop         Off
        CoMinMgn        Off
        24k             On
        phyReXmt(Us/Ds) Off/On
        TpsTc           AvPvAa
        monitorTone:    On
        dynamicD:       On
        dynamicF:       Off
        SOS:            On
        Training Margin(Q4 in dB):      -1(DEFAULT)
#
Edit - there is of course a command to (try to) turn it off. I don't feel like trying it, as I expect it to work and that would almost certainly cause a re-sync that I don't want.

Not sure whether the command will be:-

xdslcmd configure --sra off
or
xdslcmd configure1 --sra off
or either, or
xdsl configure/configure1 --sra off

My broadband basic info/help site - www.robertos.me.uk | Domains,website and mail hosting - Tsohost.
Connection - Plusnet UnLim Fibre (FTTC). Sync ~ 59.4/14.4Mbps @ 600m. - BQM

"Where talent is a dwarf, self-esteem is a giant." - Jean-Antoine Petit-Senn.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Allergy information: This post was manufactured in an environment where nuts are present. It may include traces of understatement, litotes and humour.

Edited by RobertoS (Sat 23-Nov-13 17:50:42)

Standard User burakkucat
(experienced) Sat 23-Nov-13 17:54:35
Print Post

Re: How common are PPP disconnections with VDSL2?


[re: RobertoS] [link to this post]
 
Yes, that's it. smile

If you would like, I could install the original Asbokid unlocked firmware image onto a testing HG612, harvest all the information, then install the Howling Wolf unlocked firmware image and repeat the information harvest. An sdiff (sideways difference) will then clearly show all the changes in configuration that Beattie has implemented.

Please let me know and I will put it on my "ToDo" list.

100% Linux and, previously, Unix.


Register (or login) on our website and you will not see this ad.

Standard User Chrysalis
(legend) Sat 23-Nov-13 18:40:07
Print Post

Re: How common are PPP disconnections with VDSL2?


[re: deleted] [link to this post]
 
trying to remember, did I ever sync during a period of interference and then when the snrm came back SRA pumped my speed up? hmm. no idea smile I have archived much data and still do have my cacti graphs intact but I dont recall ever syncing up with SRA during noise bursts because SRA was so good the line never dropped meaning I never had to. So my only experience was starting out at a optimal sync, sync would go down during bursts, recover again later but I dont recall it ever going above the starting sync. So yeah I guess.

Worth pointing out tho although on kitz forums its been shown SRA is enabled on the modem I dont think its actually active and working yet.

BT Infinity 2 Since Dec 2012 - BQM
Standard User RobertoS
(sensei) Sat 23-Nov-13 18:48:22
Print Post

Re: How common are PPP disconnections with VDSL2?


[re: burakkucat] [link to this post]
 
Not my field LOL. xdslcmd will do for me.

My broadband basic info/help site - www.robertos.me.uk | Domains,website and mail hosting - Tsohost.
Connection - Plusnet UnLim Fibre (FTTC). Sync ~ 59.4/14.4Mbps @ 600m. - BQM

"Where talent is a dwarf, self-esteem is a giant." - Jean-Antoine Petit-Senn.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Allergy information: This post was manufactured in an environment where nuts are present. It may include traces of understatement, litotes and humour.
Pages in this thread: 1 | 2 | 3 | [4] | (show all)   Print Thread

Jump to